Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: Masts

To: [email protected]
Subject: LF: Re: Masts
From: "hamilton mal" <[email protected]>
Date: Sat, 31 Dec 2005 09:39:27 -0000
Delivery-date: Sat, 31 Dec 2005 14:16:23 +0000
Envelope-to: [email protected]
References: <000c01c60d5a$98589e00$5ce8fc3e@l8p8y6> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]

----- Original Message -----
From: "captbrian" <[email protected]>
To: <[email protected]>
Sent: Friday, December 30, 2005 6:27 PM
Subject: LF: Masts


  100 ft verticals and 400 foot horizontals are easy are easy if you have
100
foot 'poles'........It would be interesting to know how you built and
erected those.

I use 5 section strumech telescopic towers, plus additional 20 ft tubular
sections. I can go to about 120 ft vertical with this arrangement. I also
have some high trees around the perimiter of my field, which is out in the
countryside. There are 3 towers in the field. This qth is ideal for LF work
See the G3YXM gallery for a photo of one similar tower at my GI3KEV QTH.
73 de Mal/G3KEV


here in Florida Keys on my 'lil 'ole sailboat my mast is only 40' but I do
have
thousands of miles of salt water  under and around me

Bryan

G3GVB / Ac4UA




Quoting hamilton mal <[email protected]>:

> Hi All
> Some strong signals today from DL and OK on QRS but also loud and
workable on
> CW from here.
> If LF acty picks up and there is a possibility of CW acty I will re
engineer
> the LF vertical and see what I can work.
> It is snowing today here, not good antenna wx.
> Antenna system here consists of 3 x inv L antennas in parallel, each one
33
> metres vertical and 140 metres horizontal, with an insulated ground
radial
> system. I RX with this antenna as well as the 80 metre vertical loop.
The
> loop is optimum E/W so its good for EU and beyond and also all places to
the
> West.
> This is the present setup but the vertical can be extended to have
several
> inv L's attached if necessary, then I could do away  with the loading
> inductor, although at present it is only about 350 uH.
> 73 and HNY to all
> de Mal/G3KEV/IO94SH
>
>


--


----------------------------------------------
This mail sent through http://www.ukonline.net



<Prev in Thread] Current Thread [Next in Thread>