RE: LF: G0MRF 300w Tx PA mods

["Gary - G4WGT" <g4wgt@tiscali.co.uk>]

Hi Markus & LF,

 

Thanks for the ideas, I had thought about using 2 x 100r 100 watt wire wound resistors one of my electronic suppliers has.

 

Regards

Gary - G4WGT

Web: http://myweb.tiscali.co.uk/wgtaylor

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of MarkusVester@aol.com
Sent: 28 January 2005 22:24
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: G0MRF 300w Tx PA mods

Gary and LF Group,

types of dummy-loads tested successfully at LF here

- a toaster (1000W @ 230V = 53 Ohms),
- a coffee maker (750W = 70.5 Ohms; needs some water, otherwise it'll turn itself off).

Before connecting them, I checked that there were no internal RF-bypass capacitors before the power switches.

73 de Markus, DF6NM

In einer eMail vom 28.01.2005 22:39:48 Westeuropäische Normalzeit schreibt g4wgt@tiscali.co.uk:

Next is to borrow a better dummy load &carry out some prolonged tests.