Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: Still RX QRV!

from [James Moritz] [Permanent Link][Original]
To: [email protected]
Subject: Re: LF: Still RX QRV!
From: "James Moritz" <[email protected]>
Date: Mon, 9 Aug 2004 19:38:43 +0100
References: <003001c47d98$d0f90c20$49287ad5@jgtdiynm> <004301c47de4$57ff9680$919e24d5@jboi0045tiscali>
Reply-to: [email protected]
Sender: [email protected]
Dear Jeff, LF Group,
 
The beacon is now running on 137.700kHz - it is transmitting QRSS3 with a long CW identifier in a repeating 10 minute cycle. I shall keep it running for the next few hours, assuming no thunderstorms or other problems here; any reports would be very welcome.
 
I'm afraid I have no VHF equipment here at the moment Jeff, so I guess it will have to be via e-mail for now,
 
Cheers, Jim Moritz
73 de M0BMU
----- Original Message -----
From: F6CWN
Sent: Monday, August 09, 2004 8:41 AM
Subject: Re: LF: Still RX QRV!

09./08/2004   0730z
 
 Hello Jim and the list,
 
 OK for 1900z, i am very enjoy to receive your signal from the West coast of France with the
new equipment. This morning it's very clear in audio, only some cracks time to time in the
background. When i turn the loop, i "notch" DCF39 more than 30 dB, the directivity is very
impressive.I thing i will continue in this way, big loop and high Q!
Are you QRV on 2 meters or 6 for a possible contact en SSB? ( The station is F6IFR)
We are in hollidays at this present time, and no problem for free time...
 
See you his night evening Jim!
 
 Cheers, Jeff / F6CWN
 
PS: Normaly the mouving thing is clear now! ( it was a little ant growing on the page!)
 
73
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: AR88 etc, hamilton mal
Next by Date:  Re: LF: Still RX QRV!, James Moritz
Previous by Thread:  Re: LF: Still RX QRV!, F6CWN
Next by Thread:  Re: LF: Still RX QRV!, James Moritz
Indexes:  [Date] [Thread] [Top] [All Lists]