Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: RE: looking for first signals ...

To: rsg[email protected]
Subject: Re: LF: RE: looking for first signals ...
From: jannsen <[email protected]>
Date: Fri, 4 Jun 2004 21:56:01 +0200
References: <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
James Moritz schrieb:
> Hi Jim,
>
> your PSK signs are audible in jo43sv. but qrn makes them almost
unreadable.
> see attachment.
>
> btw. what type of transmitter do you use for the PSK mode?
>
> Uwe/dj8wx
Dear Uwe, LF Group,

Thanks for the report - I transmitted CW/QRSS3 from 1900 - 2100 and 2200 -
2300, and PSK31 from 2100 - 2200. As you observed, the drawback of PSK31 on
LF is that every QRN impulse gives you a 50-50 chance of corrupting a bit,
and so losing the character. A mode using error correction works better -
like VE2IQ's "Coherent" program for example.

The TX in use here is the usual class D Decca PA - to get a clean signal, I
use an "envelope elimination and restoration" scheme, where the 136kHz drive
to the PA is phase modulated, and amplitude modulation is applied to the DC
feed to the PA. The phase keying signal is generated by the "Digimode
terminal" in DL4YHF's Spectrum Lab software, and the envelope waveform is
generated from the phase signal by external hardware.

Cheers, Jim Moritz

73 de M0BMU

Dear Jim,

I got some questions conc your TX. did you receive my direct mail dated 25th of May ?
regards
Uwe/dj8wx



<Prev in Thread] Current Thread [Next in Thread>