due to circumstances I'll have less time to work on the transmitter.
Meanwhile I tried several other transformers, as well as some
other things, like disconnecting the Scottky diodes and the 470nF
Now I have 6R8 from the TC4426 direct to the gates, which
are grounded with 47k resistor.
I tried all kind of things around the FET's with other C's to ground or
with C-R to ground etc.
Some progress has been made, but still difficult.
The ouput filter seems to have a quite large influence on the over all
Also the value of the capacitor that grounds the centre tap is important.
In my case I found better results at 330nF.
Several available cores tested, like 3C11 (white) and 3E1 (green) both 36mm.
Also tried an T106-26 from an old computer SMPS.
Wonder what current I should have when applying lower supply voltages
to the FET's.
For example. what currents to others have at 15V or 20V or so.
73, Dick, pa4vhf