Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Claim of ZL to VE7 amateur LF DX

To: [email protected]
Subject: Re: LF: Claim of ZL to VE7 amateur LF DX
From: "Rik Strobbe" <[email protected]>
Date: Thu, 05 Jul 2001 12:08:58
In-reply-to: <3B44316D.19970.ECD8C@localhost>
References: <013101c104f6$de84de00$2eb51bca@rvernall>
Reply-to: [email protected]
Sender: <[email protected]>
Just got this for the lofexp reflector, so if anyone in Europe wants to
give it a try ...

73, Rik

X-eGroups-Return:
sentto-1152098-547-994329720-rik.strobbe=fys.kuleuven.ac.be@returns.onelist.
com
X-Sender: [email protected]
X-Apparently-To: [email protected]
To: <[email protected]>
X-MSMail-Priority: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
From: "Vernall" <[email protected]>
Mailing-List: list [email protected]; contact
[email protected]
List-Unsubscribe: <mailto:[email protected]>
Date: Thu, 5 Jul 2001 22:41:22 +1200
Reply-To: [email protected]
Subject: [lofexp] Further QRSS tests on 7 July

ZL6QH and ZL4OL QRSS TESTING 7 JULY

ZL6QH and ZL4OL are conducting further slow rate digital mode test
transmissions this coming Saturday, on the frequency of 184.3999 kHz.  ZL6QH
will transmit from 0500 - 1230 UTC, and ZL4OL 1045 - 1215 UTC (targeting
sunrise time in VE7).

The transmission format for ZL6QH is dual frequency keying, with 0.4 Hz
shift, and "dot length" of 120 seconds.  The identifier is Q, sent as "dah
dah dit dah", with "dah" as 184.4001 kHz and "dit" as 184.3997 kHz.  Dual
frequency keying has equal length elements for "dit" and "dah", and only a
brief transition between elements, to save time with very slow keying, so
each Q in the ten minute repetitious sequence of QQQQQ. has the following
format:
 Dah of 184.4001 kHz for 2 minutes, then a brief pause
 Dah of 184.4001 kHz for 2 minutes, then a brief pause
 Dit of 184.3997 kHz for 2 minutes, then a brief pause
 Dah of 184.4001 kHz for 2 minutes
 A silent period of 2 minutes
 Repeated for the whole session

The transmission format for ZL4OL is single frequency keying, with 184.3999
kHz carrier, and 120 second "dot length".  This is deliberately arranged to
be "inbetween" the dual frequency keying of ZL6QH, and allows one correctly
tuned Argo screen to be able to capture either signal.  The identifier is O,
sent as "dah dah dah", so each O in the 15 minute repetitious sequence of
OOOOO. has the following format:
 Dah of 184.3999 kHz for 2 minutes
 Silent for 2 minutes
 Dah of 184.3999 kHz for 2 minutes
 Silent for 2 minutes
 Dah of 184.3999 kHz for 2 minutes
 Silent for 5 minutes
 Repeated for the whole session


73, Bob ZL2CA








<Prev in Thread] Current Thread [Next in Thread>