Andy,
Yes please!
Martin G4FKK
Talbot Andrew <[email protected]> 05/25 9:43 am >>>
I am considering bulk manufacture of a Printed Circuit Board for the
AD9850 DDS chip. The design has already been tested and includes the
DDS, output filter, voltage regulator and a 16F84 PIC. Resident
software allows the DDS source to be controlled over an RS232 link from
a PC with ASCII commands. This allows for control from a simple
terminal programme as well as custom software for PSK/ FSK etc. There
is no reason why different PIC software can't be used for keyboard /
rotary encoder etc. Mostly surface mount (large 1206 components
though) but conventional PIC in a socket for easy firmware changes.
If there is enough interest I will go ahead with a PCB order. It is
possible a company (see www.HF-INST.CO.UK ) may take the design on
board and market as a complete signal source, but for now I will just
get PCBs made if enough interest is shown. Not sure of the price, it
depends on such things as quantity, how many plated through holes,
delivery timescales and probably the phase of the Moon !
The DDS can be clocked with any frequency source desired. For LF I use
a 5MHz input derived from a master reference which allows outputs up to
1.7 MHz with 0.001 Hz resolution, but any clock up to 120MHz (40 MHz
maximum output) is useable.
Anyone interested, please let me know so I can get an idea of whether it
is worth going ahead with a commercial run.
Andy G4JNT
--
The Information contained in this E-Mail and any subsequent correspondence
is private and is intended solely for the intended recipient(s).
For those other than the recipient any disclosure, copying, distribution,
or any action taken or omitted to be taken in reliance on such information is
prohibited and may be unlawful.
|
