Walter QRSS30 would be okay - QRSS60 would be better. By shutting down at 0600Z you are limiting the TA window. I'd suggest 0700 or even 0800Z if possible. Do you have an accurate frequency readout o
Walter Thank you for the information - I'll be happy to take a look. Jay, W1VD -- Original Message -- From: [email protected] Walter Staubach To: [email protected] rsgb_lf_group@b
Dear John, W1VD, dear John W1TAG, thanks for your suggestions. So I will transmit DI2AG in QRSS30 with 3W ERP from 23UTC to 8UTC next morning, Friday, Saturday, Sunday. Exact frequency follows as soo
Dear Steve, thanks for "Grabulator II". That`s great. Please realize that I changed to 440.04416 ( I hope ). But as I saw the bandwidth of the grabulator is 7Hz, that will be enough. Thanks a lot and
Dear Group, my nearest neighbour Walter (DJ2LF) will run his DI2AG MF-beacon at 3W ERP again tonight from 2200 to 0800, QRSS30 on 440044.16 Hz. There was a trace on Steve's Grabulator II around 1540
Dear José and LF Group, Walter has made a couple of minor changes to his beacon setup: - the frequency is now 440044.000 Hz, locked to UTC(PTB) via ZDF-TV line frequency, which should be better than
Dear enthusiasts of low part MF, ............. I looked a signal DI2AG from 23z of January 14: in 30s mode it was very strong, but also in 3s (see attach) On argocaps in 3s mode: in the beginning are
Dear Steve, thanks for your info to Markus, who forwarded it to me. It would be glad if you would again tune your grabber II to the 440.044KHz. Markus will observe it, because I cannot do when the tr
Dear Uwe, I think, the "T", "M", "O" are different stations with these calls. They are transmitting at different times, so you can hear the different calls. The fieldstrength is not the same for the
Hi Walter, In fact, they don't send Morse. The pulse durations are always the same (no callsigns). See previous post. (I spent some time on RDF'ing on VLF using DF6NM's principle, the different "dots
Dear friends, DI2AG will again transmit with 3W ERP coming weekend, Friday, Saturday and Sunday, beginning 22UTC and ending 9UTC in QRSS30. Reports are welcome. 73 Walter DJ2LF
Walter Ran captures last weekend but no luck... Jay, W1VD -- Original Message -- From: [email protected] Walter Staubach To: [email protected] RSGB LF Sent: Friday, January 21, 20
Hallo Joe, sorry about your battle against Mother Nature. But every defect has a hidden chance: Can you tune your equipment to 440.044KHz to receive DI2AG? I can increase power to 3W ERP in QRSS30 (
Hallo to All, DI2AG will QRO 3W again and QRSS30, beginning 22UTC to 8UTC tomorrow. QRG will be locked to the german standard, so deviation from 440.044KHz will be few mHz. 73 Walter DJ2LF
Hello to All, DI2AG is again on air with QRSS30 and 3W ERP (probably 4W, antenna current increased). I would be glad to receive your reports and images. 73 Walter DJ2LF
Dear Steve, thanks for your suggestion. So DI2AG will QRSS60 coming night with 4W ERP, beginning 22UTC to 8UTC tomorrow. 73 Walter DJ2LF Hi Walter, Might I suggest QRSS60? The extra 3dB might do the
