Hi Jay, Am 13.11.2018 21:31, schrieb [email protected]: Stefan Did you announce your intentions for tonight's EbNaut transmission ... if so, I must have missed it. Jay W1VD Yes: f = 137.620
Hi Jay, Am 13.11.2018 21:31, schrieb [email protected]: Stefan Did you announce your intentions for tonight's EbNaut transmission ... if so, I must have missed it. Jay W1VD Yes: f = 137.620 kHz
Stefan The 0000Z transmission (first one captured tonight) was best this evening ... copy below. Similar copy on 0100Z transmission, no copy on 0200Z and 1.8 dB Eb/N0 on 0300Z. Marcus and Domenico ..
Hi Jay, Thanks for the decodes and the efforts. A pity about the other stations outside the bandwidth but anyway it was nice to see 4 EbNaut stations side by side! Maybe the other stations catched so
Hi Stefan, I would very much welcome the chance to see you on my grabber and / or try to decode you on JT9-5. If you try either one I will leave my TX off. Unfortunately I am not able to decode EbNau
Stefan Condx are certainly not what they were a few weeks back. Perhaps the prolonged low solar activity is taking it's toll. The 180, 180, 180, 180 was a full decoder run. Unfortunately I didn't not
Stephan and EbNaut, I captured your 2200Z transmission for my first over-the-air EbNaut decode Smile . Still working out the whole process but am pleased that everything came together. Tnx for the tr
Am 14.11.2018 12:12, schrieb [email protected]: Are you still running that amazing glass tube / litz loading coil? No, sadly it became damaged due to surface arcing that lead to a broken glass
Rob Congratulations on the decode! If you haven't already ... you might want to try varying the start time in tenths of a second to see if there is s/n improvement. Jay -- Original Message -- From: R
Hello Rob, My congrats to your first EbNaut decode! And even quite a distance: http://k7fry.com/grid/?qth=FM18QI&from=jn49ik00 It is interesting that you captured such an early transmission. As menti
We could move closer together, e.g. 137520 and 137519 Hz. Although the higher order sidebands may overlap, there should be no mutual interference because of orthogonal symbols, i.e. the "other" carri
Hi Stefan, Jay, and EbNaut Applying small adjustments to time (+0.05 s) and frequency (-100 uHz) was able to achieve much better decode of the same transmission. A lot of trial and error! image image
