Hi All at LF, ROS beacon running again tonight, reports welcome. 502.000kHz dial USB MF1 beacon mode repeat after 3 minutes ERP 500mW 73, Gary - G4WGT.
Hi LF, I will be running a ROS beacon tonight, details are :- ROS MF7 502.000kHz USB dial Beacon repeat after 2 minutes 100mW ERP Reports welcome. 73, Gary - G4WGT.
Hi Martin, Thanks for your report from Swansea. You can download the latest ROS from :- http://rosmodem.wordpress.com/ 73, Gary - G4WGT. On 21 August 2010 20:37, Martin Evans <[email protected]
Hello Martin, LF, OK, That's good, thank you. I have just stopped the beacon to add an extra fan to the PA heat sink as it was getting quite hot, I did have two but one failed a while ago. Be back in
Nicolas It seems the psk-report , needs the 'de' before the call , as no spots have been uploaded during the test , I also monitored for while , but nothing showed ! G.. From: [email protected] Sent: Sat
Hi Martin, Thanks for your report from Swansea. You can download the latest ROS from :- http://rosmodem.wordpress.com/ 73, Gary - G4WGT. and here's my first copy: RX1: 20:05 @ 19.3 Hz: G4WGT IO83QO <
Hi LF, I will be running a ROS beacon tonight, details are :- ROS MF7 502.000kHz USB dial Beacon repeat after 2 minutes 100mW ERP Reports welcome. 73, Gary - G4WGT.
Hi All at LF, Running ROS beacon tonight, reports & calls for QSO most welcome. 500.000kHz USB dial (for 501.500kHz), beacon 10 minute pause. 73, Gary - G4WGT.
Gary Have you a HF calling frequency ? G.. From: Gary - G4WGT Sent: Saturday, September 17, 2011 6:37 PM To: [email protected] LF Group (RSGB) Subject: LF: 500kHz ROS beacon Hi
Gary Have you a HF calling frequency ? G.. From: Gary - G4WGT Sent: Saturday, September 17, 2011 6:37 PM To: [email protected] LF Group (RSGB) Subject: LF: 500kHz ROS beacon Hi All at LF,
Ok Gary simplest is to find a 100 Hz slot and use MF-2/7 on the HF path .. also means , only need to run X 1 ros session .. you could mix the MF/HF audio if you have 2 rx ? J has tested MF mode up to
Ok Gary simplest is to find a 100 Hz slot and use MF-2/7 on the HF path .. also means , only need to run X 1 ros session .. you could mix the MF/HF audio if you have 2 rx
RX8: 23:00 @ 3.9 Hz: G0NBD de EA5HVK S/N: -14 dB, Marge: +12 dB Ok, i think i have found the bug, i will send you an email into 5 minutes. You have to open twice the program and TX and RX and the sam