RX8: 23:00 @ 3.9 Hz: G0NBD de EA5HVK S/N: -14 dB, Marge: +12 dB Ok, i think i have
found the bug, i will send you an email into 5 minutes. You have to open twice
the program and TX and RX and the same time to test if all is OK
<CRC-OK> -18 dB 1092 miles @ 174 7.055
Mhz
Sent: Sunday, September 18, 2011 6:42 PM
Subject: Re: LF: 500kHz ROS beacon
G...
OK, that's an idea worth considering but I have 2 transceivers & 2
interfaces, no problem for me. I can respond on either one or 'tother.
FB Jose's test to 28MHz.
G...
On 17 September 2011 21:09, Graham <[email protected]>
wrote:
Ok Gary
simplest is to find a 100 Hz
slot and use MF-2/7 on the HF path ..
also means , only need to run X
1 ros session .. you could mix the MF/HF
audio if you have 2 rx ?
J has tested MF mode up to 28
MHz and frequency stability ( dispersion
may be ? ) is not a problem , so
that's a green light for HF
G..
Sent: Saturday, September 17, 2011 7:41 PM
Subject: Re: LF: 500kHz ROS beacon
Hi Graham,
I do have a HF ROS console running using my FT-847 but not announced
anything for replies as yet, just testing out the possibility of running 2 ROS
sessions without interaction.
73,
Gary - G4WGT.
On 17 September 2011 19:08, Graham <[email protected]> wrote:
Gary
Have you a HF
calling frequency ?
G..
Sent: Saturday, September 17, 2011 6:37 PM
Subject: LF: 500kHz ROS beacon
Hi All at LF,
Running ROS beacon tonight, reports & calls for QSO most
welcome.
500.000kHz USB dial (for 501.500kHz), beacon 10 minute pause.
73, Gary - G4WGT.
|
