Dear LF Group, I will be running the Wolf beacon again tonight... 503.800kHz, Wolf 20 mode, from about 2200utc. Any reports welcome. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, The WOLF 10 mode beacon is now running on 503.800kHz. Any reports welcome. I monitored G0NBD's RTTY signal earlier - this was weakly audible, but only strong enough to decode on the pe
Dear John, Marco, LF Group, Thanks for the comments. I will run the WOLF beacon again tonight, probably from around 2200utc onwards. On W1TAG's suggestion, I intend to change the operating frequency
Dear LF Group, Thanks for the reports from last night, Including my first 500kHz report from Poland via SQ7MPJ. The beacon will be running again tonight from 2200utc with the same settings as before
Dear LF Group, Am now (2245utc) transmitting a WOLF 10 beacon signal on 503.500kHz. All being well, I'll leave it going for a few hours at least. Any reports would be welcome. Cheers, Jim Moritz 73 d
Dear LF Group, I will be running the WOLF 20 beacon again on 503.800kHz from approx 2200utc. Thanks for the reports from last night - it certainly seems that WOLF can reach most parts of Europe and d
Dear LF Group, Thanks for the reports on the WOLF beacon last night. At least 2 stations were able to decode it correctly, so at least I know it is set up right! I will run the beacon again tonight,
Dear LF Group, Thanks for the reception reports from last night. I will be running the beacon again tonight from 2200utc, WOLF 20 mode on 503.800kHz. Cheers, Jim Moritz 73 de M0BMU
Dear Graham, LF Group, The WOLF software is at http://freenet-homepage.de/dl4yhf/wolf/index.html . WOLF is really aimed at extreme weak-signal DX, and has worked well on 136kHz, so might be a possibi
Dear LF Group, The M0BMU WOLF 20 beacon is now running again (from 2225utc) on 503.800kHz - any reports will be welcome. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, The WOLF 20 beacon is running again (from 2310utc) on 503.800kHz with 100mW ERP. Any reports would be very welcome. Thanks for all the reports and suggestions re the WOLF transmissions
Dear Mal, LF Group, Actually, what I said is backed by hundreds of practical measurements by myself and others. With care, the results are very consistent; I find that field strength measurements are
Dear Mal, Graham, LF Group, This is incorrect. The ERP could be calculated as: P(erp) = (TX power) x (Antenna efficiency) x (Antenna directivity) The directivity of a small vertical antenna over the
Dear Graham, LF Group, The problem with rope as an insulator is that, when it gets wet, its dielectric properties will become poor, however good an insulator it is when dry. I expect with the present
Dear LF Group, The WOLF 20 beacon is running again with same conditions as before - 503.800kHz, 100mW ERP, from about 2215utc. Any reports would be very welcome. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, The WOLF 20 beacon is running again (from 2205utc) on 503.800kHz with 100mW ERP. Any reports would be very welcome. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, Good news on the extension to 500kHz operation - Have to start on the QRO TX now! The M0BMU WOLF 20 beacon is now QRV again (2200utc) on 503.800kHz - still with 100mW ERP for the time
Dear Wolf, LF Group, Thanks for the reception report from last night. The beacon is now QRVagain from about 2230utc - WOLF 20 mode, 503.800kHz, 0.1W ERP. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, The WOLF 20 beacon is running again (from 2250utc) on 503.800kHz with 100mW ERP. Any reports would be very welcome. Thanks to SM6LKM for the reception report - the usual problem people
Dear LF Group, The M0BMU WOLF 20 beacon is running again on 503.800kHz - got started a bit late tonight at about 2310utc. Any reports welcome. Cheers, Jim Moritz 73 de M0BMU
