Hi Paul, What kind of 1 Hz low pass filter gives the result shown in "received waveform after filtering" the third image? The rate of change of the edges is greater than 1 Hz. Regards, Edgar Moonah,
Hi Paul, OK, the image is to show an idea not the result of passing the signal through a low pass filter. Thank you for your reply. Regards, Edgar Moonah, Tasmania.
An experiment with a small pair of loops and notebook with sound card as the receiver. Hopefully detail is here. https://www.dropbox.com/s/e0s7flhqeq0p4l9/4%20m%20loops.zip?dl=0 Regards, Edgar Moonah
Hi Stefan, Try this one. https://www.dropbox.com/s/9x26r4x4ifx3rzr/4%20m%20loops.zip?dl=0 Dropbox have "improved their service" by making the public folder private from March this year. I am trying t
Hi Stefan, The loop is just the result of some experimentation, make it a see how it performs. I was surprised how good the results were. The ferrite cores are FT50-75, AL 2750, I will continue to tr
Hi Luis, Glad that you found the information useful. You may wish to adjust the amplitude ranges in the Spectrum Lab instances on your grabber. In Spectrum Lab select: "Options" > "... part 2: Ampl-R
Hi Markus, Thank you for your suggestions. Are you suggesting to have 3 turns of the loop wire ( 1 turn now ) and 36 turns on the secondary of the transformer? Regards, Edgar
A pair of 22 m circumference loops have been set-up. The shape is of a Isosceles Right Triangle with the long side as the base The signal is picked up from the centre of the base with 3:36 turn toroi
Hi, The image shows a signal at 50 kHz received at Moonah, Tasmania over the past three days. Searching the web there is only a time signal RTZ, Irkutsk, Russia, at 50 kHz that could be found. There
Off topic but may be interesting. http://www.abc.net.au/radio/sydney/programs/conversations/conversations-brian-j-obrian/8391708 Regards, Edgar Moonah, Tasmania.
Zevs versus Zeus https://translate.google.com.au/translate?hl=en&sl=ru&u=http://www.liveinternet.ru/community/3629085/post123817602/&prev=search Regards, Edgar Moonah, Tasmania.
Hi Stefan, Interesting, are you aiming for a high Q coil, If so what is the best geometry for the coil for that frequency? Regards, Edgar Moonah, Tasmania.