Hello Jacek,
Thanks for the links I will try a Google Translate request on the
forum you mentioned, I appreciate your trouble and time, all the best!
Monday, March 18, 2019, 1:52:36 PM, you wrote:
> Hello
> ### There is also some information in a post from Dave G3YXM here
> (uncluding photos):
> https://klubnl.pl/rsgb_lf_group-archives/html/rsgb_lf_group/2018-10/msg00087.html
> He says it's 50W.
> ### I see it mentioned here:
> http://sp7pki.iq24.pl/default.asp?grupa=165822&temat=441483
> Someone was looking for documentation. The response from SP9IKF is:
> i don't remember the exact model, but most of these devices from RADMOR
> and later UNIMOR were installed in Polish shipyards, and they must obey
> the parameters in the SOLAS convention:
> 50W output
> 410-512kHz
> A1A and A2A modes
> -24V DC power supply
> The TX is driven from a crystal, maybe the later versions were synthesized
> but i don't think so. Generally it's a device designed in the '70s, the
> device is completely transistorized. This is all that i remember.
> The reply from SP3HSZ:
> Thanks for the info. I could use some technical documentation. It is based
> on a crystal, and works very close to our band. Looking at the PA i think
> it might be capable of more than 50W, but i don't want to run it without
> the docs.
> You could try on elektroda.pl (general electronics site) and
> sp7pki.iq24.pl (but this was already mentioned and not much information
> was given).
> VY 73
> Jacek / SQ5BPF
> On Mon, 18 Mar 2019, Chris Wilson wrote:
>> Date: Mon, 18 Mar 2019 12:39:53 +0000
>> From: Chris Wilson <[email protected]>
>> Reply-To: [email protected]
>> To: Jacek Lipkowski <[email protected]>
>> Subject: Polish MF ship back up trasmitter
>>
>>
>>
>>
>> Hello Jacek,
>>
>> Chris, 2E0ILY here. I hope you do not mind the direct e-mail?
>>
>> I just got hold of an MF transmitter made in Poland by Unimor. It's
>> possibly an NR-2502 model, Type 2511/2, all transistor, probably
>> about 50W output crystal controlled switchable frequencies with auto
>> emergency distress keying on the emergency channel. I have found
>> very little info on it, and would especially like a schematic. I
>> wonder if there are any speciality Polish groups that might have
>> someone present who has such information? Thanks Jacek.
>>
>> --
>> Best regards,
>> Chris mailto:[email protected]
>>
--
Best regards,
Chris mailto:[email protected]
|
