Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: EbNaut tonite

To: [email protected]
Subject: Re: LF: EbNaut tonite
From: DK7FC <[email protected]>
Date: Tue, 19 Mar 2019 08:17:17 +0100
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/simple; d=posteo.de; s=2017; t=1552979838; bh=YlOxJZI0IJEJT2ajr7b2PjqoYDHuhxQ1qcYjTBpzn9A=; h=Date:From:To:Subject:From; b=AmulwPaxqv5aaCU5YT7EvJqUSxYlo4XzLtIkQ1siJ58Ux4Iwz1oTEWq3GB8pYKf2o LDuwFaNGyEG1CkPr2pkB00ExEcxF43hsJtcs5pBIqp9jrL9qNcBHBbocDXJd0TiG7H JfAbr0HVLFQCGgPXwXY3bfxC/LgOjnidWXNOFMhPKF2hd/zhib8lwYJRX3lBQ2VXfO INK3iLDukYajSDinByOfEf176Iq2zZp+BVYzM0Owdb9N7VIAO4AcdMzS6/acy5Ghtl 0+lRlnOCaZ4yFvksnyNxeVPiVQPxvEmWuo36cT/f6r82Ze5raSIjH8/gz3PNvJjdqP 8g9X/TUjaGlIg==
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hello Martin and Michel, LF,

Thanks again for your feedback. Martin, good luck with your first EbNaut decodes. BTW we need more RX stations on VLF too :-) You would find more opportunities there to try to get an EbNaut decode :-)

Michel, RR abt JN18HP. TX power was just 150 W here, Using 30 dB less power and a shorter message, maybe just my callsign, it would work with 70 mW, once again a job for a 9V battery! ;-)

Jay, i hope you can decode the message. If so, don't hide it. Someone must tell the message, it is a part of the game :-)

73, Stefan


Am 18.03.2019 23:58, schrieb Michel Brunel:



Are you in your holiday QTH close to the sea?

Not yet, current QTH is JN18HP
Next stay in IN99EF, I plan to do some LF EbNaut transmissions and WSPR as well.

Signal acquisition is performed by a small linux box running AlpineLinux and Paul's vlfrx-tools
while decoding is done under windows on a faster PC

Another decode with BER = 0.0%  you could reduce the output power by 30 dB

Michel - f5wk






--
<Prev in Thread] Current Thread [Next in Thread>