Hi Riccardo, Stefan, LF,
Pleased to get your report of improved signal strength Riccardo.
The R means "Rotated L" so it is in the sky again since yesterday.
Today a cermaic feedthrough was installed on the PVC bucket
that houses the coil. It was cold (-10 C) today but the work had
to be done; there was too much charring and arcing. All seems OK
now and the TX is on (one Decca module) 2.2A RF
73
Joe VO1NA
On Mon, 11 Feb 2019, DK7FC wrote:
Hello Riccardo,
I like the precision of your RX frequency. I should add a few nulls to my
file too :-)
Good work regarding Joe's reception!
73, Stefan
Am 11.02.2019 12:56, schrieb Riccardo Zoli:
Joe, LF
Very strong signal last night continuously from 2330z to 0530z.
Best decode at 0300z, info attached.
RX setup: inverted "L" TX antenna (slightly detuned, 6 dB attenuator
inserted) and SDR.
All the best,
73 de Riccardo IW4DXW
Il giorno gio 7 feb 2019 alle ore 17:44 <[email protected]
<mailto:[email protected]>> ha scritto:
Apologies: I misspelt Domenico and did not acknowledge Riccardo's
autodetector.
73
Joe
On Thu, 7 Feb 2019, [email protected] <mailto:[email protected]> wrote:
> Dominico,
>
> Thanks to you and Markus and Domenico for the autodecoder service.
> I will check the modulator and try again tonight. Some antenna work
> is planned as well when the wx improves so there should be some more
> dB available soon.
>
> 73
> Joe
>
> On Thu, 7 Feb 2019, Domenico IZ7SLZ wrote:
>
>> Joe, LF
>> in my EbNaut log
>> *https://qsl.net/iz7slz/EBNAUT/DECODED.TXT
>> <https://qsl.net/iz7slz/EBNAUT/DECODED.TXT>*
>> there are some decodes of your EbNaut of last nights (QRB=5426
km). Seems
>> that since yesterday, only carrier is sent on usual qrg 137477 Hz.
>> Autodecoder here is now running, every XX:00 and XX:30 on Joe's
parameters:
>>
>> 137477.000Hz N=7 T=3s 8K19A CRC=16 list=2000 sym=608 Duration=1824s
>> T_OFFSET=0.0s F_OFFSET=0.000Hz
>>
>> 73, Domenico IZ7SLZ / JN80nu
>>
>
>
|
