Re: LF: Ebnaut tonite from JN80

[Riccardo Zoli <riccardozoli80@gmail.com>]

Jay, Domenico, LF

now it's raining and the antenna current it's quite unstable.

Anyway, tonite I'll try another TX session with a new Spectrum Lab configuration.

In particular, I'd simply use the aux out as "quadrature output for I/Q modulator" instead external HDSDR program and without VAC:

https://www.dropbox.com/s/f7lmf7na60rhgh0/Screenshot_20190128-221811.jpg?dl=0

The image rejection optimization isn't possible by software but it's already quite good.

So:

QRG: 137546.2 Hz

Coding 8K19A

CRC 15

3 sec./sym

7 characters

Duration: 30 min.

Every 30 min., 1st on 2200z, last on 0700z

Many thanks.

All the best

73 de Riccardo IW4DXW

Il giorno Lun 28 Gen 2019, 20:45 <jrusgrove@comcast.net> ha scritto:

Riccardo

 

What was your transmission schedule last night ... I must have missed it.

 

Jay W1VD

 

----- Original Message -----

From: Riccardo Zoli

To: LF Group

Sent: Monday, January 28, 2019 1:22 PM

Subject: Re: LF: Ebnaut tonite from JN80

Rob, Jay,

thank you so much, as always, for reports.

Rob: QRB is 7048 km, congratulations! It's a really excellent job.

All the best

73 de Riccardo IW4DXW

Il giorno Lun 28 Gen 2019, 13:20 Rob Renoud <k3rwr@md.metrocast.net> ha scritto:

Domenico and Riccardo,

Riccardo:  1 Decode at 2300 UTC

Rank 0; cEb/N0 3.2; Eb/N0 0.9; MSG 73, BER 38.7; Ref Phase 0,0,0,0

Domenico:  Sorry, no decodes.

73,

Rob

On Jan 28, 2019, at 06:06, "jrusgrove@comcast.net" <jrusgrove@comcast.net> wrote:

Domenico

 

Sorry to report no decodes ;~( .

 

Jay W1VD

 

 

----- Original Message -----

From: Domenico IZ7SLZ <iz7slz.domenico@gmail.com>

Reply-To: <rsgb_lf_group@blacksheep.org>

To: <rsgb_lf_group@blacksheep.org>

Sent: 1/27/2019 1:32:37 PM

Subject: Re: LF: Ebnaut tonite from JN80

---

Rob, Jay, LF

Another attempt tonight. Same parameters (6 char, 3 s/sym, crc16, 8K19A)

Qrq is 137545.2 Hz 

(The script is ok now!!)

Every hour from 21.00 utc 'til 07 utc of tomortow)

73, Domenico IZ7SLZ 

On 27 Jan 2019 15:25, "Rob Renoud" <k3rwr@md.metrocast.net> wrote:

Domenico,

No decodes as you were outside of my receive range.

73,

Rob

On Jan 27, 2019, at 05:27, Domenico IZ7SLZ <iz7slz.domenico@gmail.com> wrote:

LF,

my previous  transmission's announcement was wrong.

Since i have run an obsolete setup file, the transmissions succeeded but on 137540.0 Hz  (instead of 137545.2 Hz) with 6

char, 3 s, 8K19A, CRC16.

I hope that receiving attempts can be done anyway. Sorry for the trouble.

I will send now, via daytime propagation, an 'hope' message on 137540 Hz, 38 characters 0.5 s/sym 8K19A, CRC16

at 10:30, 11:30, 12:30, 13:30.

Finger crossed also for that situation !

73, Domenico IZ7SLZ

On Sun, 27 Jan 2019 at 00:24, Domenico IZ7SLZ <iz7slz.domenico@gmail.com> wrote:

Yes Markus, LF

Confirm: 6 characters.

Apologies for the clerical error and thanks Markus for the advice.

73, Dom IZ7SLZ

On Sat, 26 Jan 2019, 22:49 Markus Vester <markusvester@aol.com wrote:

Hi Domenico,

6 characters I would guess?

73, Markus


-----Ursprüngliche Mitteilung-----
Von: Domenico IZ7SLZ <iz7slz.domenico@gmail.com>
An: rsgb_lf_group <rsgb_lf_group@blacksheep.org>
Verschickt: Sa, 26. Jan. 2019 19:55
Betreff: LF: Ebnaut tonite from JN80

LF, Ebnauteers

An attempt to pass my complete call sign with EbNaut on 137545.2 Hz.

5 char, 3 s, 8K19A, CRC16, duration 28', every hour from 21.00 UT to 08.00 UT of tomorrow.

73, Domenico IZ7SLZ