Return to KLUBNL.PL main page

[Top] [All Lists]

Re: LF: EbNaut Attempt?

To: [email protected]
Subject: Re: LF: EbNaut Attempt?
From: ik1hgi Qrss Qrpp <[email protected]>
Date: Thu, 4 Oct 2018 12:29:15 +0200
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed;; s=20161025; h=mime-version:references:in-reply-to:from:date:message-id:subject:to; bh=LeG1fna68iDDupB6dWYQPc/g+ooBNKIPJ94EPp/yPTI=; b=uxvgS7RPQouQPTwlTEhUyyNNqesXtuGVmaOBRht0orHhpYdK+QOMAHj/TVGQpGJdoo L0eRUMCzj2d5K22bWDNFqE0QCCkSbdqpCEN96AH7qHqws2u5+5NeFjILxtR3Uydr85Ro 3WpnTa3N19AzHiTKd87SvbJBSX1ra+fiFktSUbcuRpbUDk5uPnfPrnCi91rYztJ9wtzY iK1ARP3/2VEk2CfCZUt6iHRnHeocHjf71SGb2hTzVns4GrJGiAUrvahOv/Gs7etPp8N+ ilw7lVLjRXZpqXkeN+oOrnQkzn+sA0XNqt66G6926Vaiptpaq2ikCjeCH6vW1/oSkB+P HNbA==
In-reply-to: <[email protected]om>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]om>
Reply-to: [email protected]
Sender: [email protected]
hi LF I still have to correct the frequency 137.480 khz do I have to correct again so as not to disturb?

Il giorno gio 4 ott 2018 alle ore 10:39 Riccardo Zoli <[email protected]> ha scritto:

Hi Luis, Markus, LF

Yes, Luis. Like Markus said, you're using a wrong position to change the phase.
With Tony IK1HGI, we have tested a solution to produce a correct BPSK modulation using a G0MRF PA schematic. Here's the link to Tony's website page, that explained clearly what to do:

In short, the XOR operation must be carried out after the x2 stage (D-ff, CD4013) simultaneously on Q and Q denied signals.

All the best

73 de Riccardo IW4DXW

Il 04 Ott 2018 07:37, "VIGILANT Luis Fernández" <[email protected]> ha scritto:
Hi Markus, EbNaut

It was me, with 80w from the D class PA

I'm producing 180° phase shifts with xor at 2x the frequency to feed the PA. So it seems that the PA do also reduce phase shifts to half :(

Which would be the way to do it ?

Congratulations for the EbNaut grabbers

73 de Luis

El 3 oct. 2018 11:29 p. m., Markus Vester <[email protected]> escribió:
Between 19:58 and 20:28 there was a strong and stable signal on 137490.0 Hz, coming in from west or southwest. However the keying seemed to be in 90° steps instead of 180°, so not decodable. Maybe a problem with a /2 divider in the transmit chain?

Best 73,
Markus (DF6NM)

<Prev in Thread] Current Thread [Next in Thread>