Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: VLF: 8.270

To: [email protected]
Subject: Re: VLF: 8.270
From: DK7FC <[email protected]steo.de>
Date: Fri, 10 Feb 2017 17:22:36 +0100
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hi Markus,

Many thanks. A good result :-)
It would be interesting to know the highest possible Eb/N0, i.e. with a precise time offset setting and waiting until the decode process is completed :-) My PC needs 23 minutes to pass the decode process ;-)

73, Stefan

Am 10.02.2017 15:55, schrieb Markus Vester:
Fine decode!

Best 73,
Markus

-----Ursprüngliche Mitteilung-----
Von: DK7FC <[email protected]>
An: rsgb_lf_group <[email protected]>
Verschickt: Mi, 8. Feb 2017 17:29
Betreff: Re: LF: Re[6]: LF: Re: LF: Re[5]: LF: Re: LF: Re[4]: LF: Re: LF: Re[3]: LF: Re[2]: LF: VLF 8.270

Another day of delay for that message. Means:

f = 8270.100000 Hz
Start time: 10.Feb.2017   06:00:00 UTC
Symbol period: 30 s
Characters: 2
CRC bits: 32
Coding 16K21A
Duration: 8h, 32m, 0s
Antenna current: 700 mA


Probably i'm running some carriers and other EbNaut messages tomorrow evening...

73, Stefan

Am 07.02.2017 19:19, schrieb Alex K:

OK Stefan,
No problem, grabber will run. 

Вторник, 7 февраля 2017, 21:10 +03:00 от DK7FC <[email protected]>:
I need to delay that experiment by one day. There will be some workers
on the roof tomorrow. My 2970 Hz transmission will end today 23:30 UTC.

73, Stefan

Am 06.02.2017 20:13, schrieb Alex K:
> Yes Stefan, both computers are running and recording for ebnaut!
>
>
>> Понедельник, 6 февраля 2017, 21:41 +03:00 от DK7FC<[email protected]>:
>>
>> Hi Alex, VLF,
>>
>> I would like to try an EbNaut message:
>>
>> f = 8270.100000 Hz
>> Start time: 08.Feb.2017 06:00:00 UTC
>> Symbol period: 30 s
>> Characters: 2
>> CRC bits: 32
>> Coding 16K21A
>> Duration: 8h, 32m, 0s
>> Antenna current: 700 mA
>>
>> Is that ok for you Alex, will your RX be prepared then?
>>
>> 73, Stefan
>>


<Prev in Thread] Current Thread [Next in Thread>