|
Good going Max !
Yes , that's the modern low signal way
, 1 mW in the Ae and 500 watts in
the cpu ..progress  have fun, bands open , knee deep in stations ,
lucky opera is only 1.5 Hz wide hihi
73-G,
1836 ALL de IW4DXW (Italy): Beacon Op4 in Lido di Spina (FE) 10w +
End Fed 27m long
Sent: Friday, July 29, 2016 10:18 PM
Subject: Re: LF: De F6CNI : info to Max IK0VVE.
Graham,
well my Radio PC (dedicated) is a x6 processor
with 8 GB RAM, Opera CPU meter never goes to red. I usually (not always) use 2
sessions of Opera and 2 of WSPR-X with my elad sdr. All together
they do not contribute to consume more than 30/40% of the 6xCPU
resources.
The
Opera sessions run in separated directory, wfall off to save power (Continuous
200/220W when all running, HI! More than my MF
power)
Thanks.
73, Max IK0VVE
______________________________
...here some of my HAM Radio projects...
Cc:
Data:
Fri, 29 Jul 2016 21:59:01 +0100
Oggetto:
Re: LF: De F6CNI : info to Max IK0VVE.
Max, should not be a problem with windows 10
and 1-5-8
Version 1-5-7 uploads un-verified dynamic
spots to the psk-map
which can cause confusion , 1-5-8 uploads only Opera ,
Only thing to check is the CPU loading
, if its in the red
then performance will degrade , can stop the
w-fall
to save cpu loading
73-G,
20:39 477 IZ7SLZ de G0NBD Op8 Deep Search 1277 mi -35 dB in 1494.6 Hz with
100w + 8m inv-L
Sent: Friday, July 29, 2016 9:46 PM
Subject: Re: LF: De F6CNI : info to Max IK0VVE.
Hi Andy, thanks for reply. I
use 1.5.8 with win10, the worst combination I suppose, HI. Yes now I'm on 477
but not in 160m... should it be a problem with a couple of sessions running
together? Where can I find the 1.5.7 version? Thanks a
lot. 73, Max IK0VVE
______________________________
...here some of my HAM Radio projects...
Cc:
Data:
Fri, 29 Jul 2016 21:55:00 +0200
Oggetto:
LF: De F6CNI : info to Max IK0VVE.
Hello Max.
You said : “why i don't appear in the map?
“
For info here I see you on the map. But I had sometime
before this problems :
- Using version OPERA v 1.5.8 with a Windows 7 computer no problem. With
others computer running Windows 8.1 or 10, no map display...
- Using version OPERA v 1.5.7 all is OK with map using any Windows 7 – 8.1
and 10 systems.
I do not understand why ?????????? Perhaps an other explanation ?????
So now I use only the v 1.5.7 version. HI !
73 de Andy.
Sent: Friday, July 29, 2016 9:26 PM
Subject: Re: LF: A Night at the Opera Act 3 477 op8
Hi Graham and all, why i
don't appear in the map? There's some setting that I don't know? 73, Max
IK0VVE
|
