Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: SAQ in U.S.

To: "[email protected]" <[email protected]>
Subject: RE: LF: SAQ in U.S.
From: Laurence KL7 L <[email protected]>
Date: Sun, 3 Jul 2016 08:44:11 -0800
Importance: Normal
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Morning John - Im on the larger pond :-) but reasonable copy of both given QRN given I was on the VLF omni. A lot harder on the ears than at Christmas.


http://kl7l.com/saq3rdjuly160904z.jpg


Laurence KL7L BP51IP Alaska
L400b @ 35ft/Speclabs/Audiocity


> To: [email protected]
> From: [email protected]
> Date: Sun, 3 Jul 2016 09:43:32 -0400
> Subject: LF: SAQ in U.S.
>
> I had decent copy of SAQ's 1200 UTC transmission this morning, at our
> Maine QTH (FN43sv). The antenna was a 150m wire on the ground in the
> woods, into a preamp, through a CAT5 feedline to the shack. An audio
> transformer was used to couple into a lap-top, and I ran the SAQ
> receiver file on SpecLab.
>
> The only problem was the loud static clicks and the long release time of
> the AGC in that SAQ module for SpecLab. A loud click could wipe out most
> of a word, and I decided not to play with the settings during the
> message. Actual copy was limited to about 70% as a result. Not bad, though.
>
> Any other reports from this side of the pond?
>
> John, W1TAG
> Raymond, ME FN43sv
>
<Prev in Thread] Current Thread [Next in Thread>