If I transmit on 29.520 leave dial at 27.945 put dex at
29.525 should be good???
From:
[email protected]To:
[email protected]CC:
[email protected]Date: Thu, 6 Mar
2014 20:49:08 +0000
Subject: Re: LF: New OPERA OP/OPDS 2H tonight on 27.945
Dial Freq... ?
Listed in the software is
for dial set 28.000 usb
min rf qrg = 29.550
KHz
max rf qrg = 29.600 KHz
Yes 25 Hz up is mid
band , allowing 5 Hz gaud band
29.555 is min 29.950 is max set rf-qrg
so 29.575 would be mid band , with
28.000 dial set usb
That's why from wspr day 2
on 500 , we all used the dial set ,
day 1 was cancelled as no one
could find each other !
Good luck to Bob and Dex over
there ,
>> Bob add the Carrier
QRG to the web beacon <<
73-G,
Sent: Thursday, March 06, 2014 8:31 PM
Subject: Re: LF: New OPERA OP/OPDS 2H tonight on 27.945 Dial Freq...
?
Opera-2H
users,
according to Grahams post, Opera software is
listening 1.55 to 1.6 kHz audio band. So the center would be 1.575 kHz (not
1.555), and 29.925 kHz dial would be best to put Bob and Dex near the
middle? Graham, please confirm.
73, Markus
Sent: Thursday, March 06, 2014 5:56
PM
Subject: LF: New OPERA OP/OPDS 2H
tonight on 27.945 Dial Freq...
WH2XBA/1 [WH1XBA call used for
OP/OPDS] starts at 2200 till at least 0700-0800. Tx Freq 29.499 and
possibly with Dex WH4XBA couple herzt higher. Use OP2H mode
on NEW 28 kHz program. Markus has posted OPODS info on LF reflector
or contact him. OP reporting will be on PSK reporter under 73 band as no
more room for 29. GL, Bob
Sent: Wednesday, March 05,
2014 6:47 PM
Subject: Re: LF: RE: 29.499
QRSS 120 starts 2200...
New versions out
Bob , V 1-5-2
Its loaded
with OP2H and OP16 ,
same routine as
before , set 28.000 usb to give
29.550 to 29.600
This looks to be
quite a tight pass band , you need to aim
for 29.555 , but the play off is the
level of false decodes , the wider the slot
, the less reliable the system is and
in this case , the noise level is very high
All functions available ,
should be looking 3/4 db better than
Op64 ,
The psk-map should
show as VLF
73-G,
