Re: Re: Re: LF: 8270.004Hz

[uwe-jannsen@kabelmail.de]

Peter, seems you are ready for decoding Op-4h. or?
uwe/dj8wx

---

Von: rsgb_lf_group@blacksheep.org
Gesendet: 27.01.2014 20:21
An: rsgb_lf_group@blacksheep.org
Betreff: Re: Re: LF: 8270.004Hz

---

Hello Uwe, VLF

 

The trace at 8270.015 Hz in my grabber is my own local backyard DX signal.

A notebook output at 3 m wire that TX in my home.

RX antenna in backyard at 20 m distance.

 

Btw;

You'r TX went QSY 0.001 Hz up :-)

 

73's, Peter - PA1SDB

 

www.qsl.net/pa1sdb

 

 

 

 

----- Original Message -----

From: uwe-jannsen@kabelmail.de

To: rsgb_lf_group@blacksheep.org

Sent: Monday, January 27, 2014 5:17 PM

Subject: Re: Re: LF: 8270.004Hz

Hi all,

During my last emissions  on VLF the antenna system was not resonant anymore because I took the top of a huge tree down. some twigs did contact top wires.

I thought that would make abt 10Hz off resonance and there was no need to do anything.

Today – we had a nice sunny day - I measured  the resonant point and found it was plus 200Hz off. The FS meter – RYCOM 1307A – jumped from -4dBrel to 0,5dBrel when resonating the system to 8970Hz agn.

The TX is ZOA agn since 1710utc. Phase correction and NMEA decoding on.

GL

Uwe/dj8wx

 

---

Von: rsgb_lf_group@blacksheep.org
Gesendet: 26.01.2014 19:31
An: rsgb_lf_group@blacksheep.org
Betreff: Re: LF: 8270.004Hz

---

Im so sri I have to switch off the TX agn . reason: strong wind and snowrain
Uwe/dj8wx

---

Von: rsgb_lf_group@blacksheep.org
Gesendet: 26.01.2014 18:44
An: rsgb_lf_group@blacksheep.org
Betreff: LF: 8270.004Hz

---

Hi Paul, Wolf, Markus, Peter es all,

TX is ZOA agn in mode A0, phase correction on, NMEA decode activated.

GL
Uwe/dj8wx