Joe,
Now i'm calling CQ in CW on 472.2 kHz. Can you hear me? Ready for
another try in CW or QRSS-3?
73, Stefan
Am 14.12.2013 13:08, schrieb [email protected]:
Hi Christian,
Nothing heard last night unfortunately.
You'll have to visit the shack to see my grabber as
there is no internet. Will be QRV again tonight.
OOOO QRSS3 and 0100 CW.
73
Joe
On Sat, 14 Dec 2013, C. Groeger wrote:
Hi Joe,
Will send some cq on 472.1 just now.
Maybe you will hear?
Where can I find your grabber?
73, df5qg
Christian Groeger
[email protected] schrieb:
Hi Stefan,
Just started qrss3 beacon which will run to 0200 when the telegram
starts per schedule. Will watch your grabber and mine!
73
Joe
On Sat, 14 Dec 2013, Stefan Schäfer wrote:
Hi Joe,
I'm stopping my beacon and watch for you the whole time. Maybe you
will appear in the QSB, so we can get a first impression over that
path. Could you run it a few times longer? As soon as i can read
you, i will attempt a QSO.
73, Stefan
Am 14.12.2013 02:20, schrieb [email protected]:
Hi Stefan,
Been calling you on qrss3 but no reply. Your sigs were variable so I
doubt the path is good at the moment. The exciter is not frequency
agile
yet -- sorry. This will be a project soon. We can try again
tomorrow.
QRSS at 0000-0100.
73 and thanks
Joe
On Sat, 14 Dec 2013, Stefan Schäfer wrote:
Hi Joe,
I just found the latest spot in the 630m DX cluster. You are
already QRV? Can we make a sked please?
Can you listen on 472.2 kHz? Or suggest another frequency. I will
try to listen for you. Or, send some QRSS-3 on 476.180 or so. My
grabber is running at
http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_MF_Grabber.html
73, Stefan/DK7FC
PS: There is local QRM on 477.7 here, at least for CW this is not
odeal for me...
Am 10.12.2013 20:40, schrieb [email protected]:
Hi Stefan,
The band is fairly clear. Only a few carriers and WD2XSH stations
were heard so far; there is no preferred frequency so just let me
know
where you will be. 476.17 is fine but there is a carrier 10 Hz
below
that. I share your doubt we will be able to do CW because my ERP is
only about 1.5 watts, but we can certainly try. The plan is to run
the CW beacon while there is no CW and QRSS QSO activity, ie: 0300
to 2300 UTC for the 14 and 15th. The TX QRG is 477.70 kHz.
73
Joe
|
