RE: LF: RE: 630m WSPR this evening

["Dave G3WCB." <ganymede444@btopenworld.com>]

Hi, Roger.

 

I'm copying you this morning - see screenshot. (I've got a bit of interference just HF of your WSPR transmission).

 

Have you changed anything your end?

 

73, Dave G3WCB IO91RM

 

 

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of Roger Lapthorn
Sent: 12 September 2013 20:22
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: RE: 630m WSPR this evening

And you are weaker with me Dave G3WCB (-30dB) than on the earth-electrode set-up. Suspect loop directionality and odd orientation may be the issue?

73s

Roger G3XBM

On 12 September 2013 20:06, Dave G3WCB. <ganymede444@btopenworld.com> wrote:

Hi, Roger.

 

No sign of you so far this evening.

 

73, Dave G3WCB IO9RM

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of Roger Lapthorn
Sent: 12 September 2013 19:15
To: rsgb_lf_group@blacksheep.org
Subject: LF: 630m WSPR this evening

'Recently I moved 350m east (!) to a new QTH and I've been experimenting with 630m WSPR.

My initial tests were with the transverter on my website feeding a pair of earth-electrodes but with a shorter baseline than was possible at the old QTH (about 12m separation). Although I managed to get reports from G, ON and PA, it was clear that results were nowhere near as good as I obtained at the old QTH. I am speculating that this is due to the effective spacing between earth rods being much shorter and due to buried wires and pipes criss-crossing the lawn. On RX it is working very well though and I have copied most of the nearer Europeans on 630m WSPR.

This afternoon I converted the earth-electrode antenna to an "in the air" loop by disconnecting the earth rods and joining the wire ends with a wire running along the top of the lawn (in the grass). The loop DC resistance is 0.9 ohms and it tunes sharply with about 1.7nF. Matching is via a 3C90 step-down toroid.

Initial encouraging reports include first spots from M0PPP, who had failed to copy me before from this QTH, as well as PA3ABK/2 and G8HUH.

If anyone else can look for me this evening I'd appreciate it. The loop is not very high and can be further improved if results this evening are encouraging.

73s
Roger G3XBM

--

http://g3xbm-qrp.blogspot.com/
http://www.g3xbm.co.uk
https://sites.google.com/site/sub9khz/
http://qss2.blogspot.com/
http://www.youtube.com/user/g3xbm

--

http://g3xbm-qrp.blogspot.com/
http://www.g3xbm.co.uk
https://sites.google.com/site/sub9khz/
http://qss2.blogspot.com/
http://www.youtube.com/user/g3xbm

G3XBM 10z25 13 Sep 2013.jpg
Description: JPEG image