Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz

To: "[email protected]" <[email protected]>
Subject: Re: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz
From: M0FMT <[email protected]>
Date: Thu, 11 Apr 2013 11:28:35 +0100 (BST)
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.co.uk; s=s1024; t=1365676115; bh=VhmRYIjDfPbdpyGxyMz/dpZlbvLjF4WSHoS8sXBgYvU=; h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:References:Message-ID:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=gpkNHV2jjAuXdrqNQZXBrtJY9baV2oIEwAHWpaCX1mYJ2ccsAXUmwapeb9gjZxDsmAdBPrwE7DkEc03U8j0AZYUZ6NCFJqIK27Cq52FWMNac3/WHid9KqlyTb3ijSq9mWM37l1eeSG3MaVmXbfG2ilmbaQYVWQ2XaMHHkUVjrDI=
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=X-YMail-OSG:Received:X-Rocket-MIMEInfo:X-Mailer:References:Message-ID:Date:From:Reply-To:Subject:To:In-Reply-To:MIME-Version:Content-Type; b=zbviOHLzu5SZixb/4YJOrihI+GW6yxvtGqjDFcPVPjywljrSUXm2OMs+GsxKjQOeM0ZMOa6DonyG8UQAO6F/wMsAfEzU4WfPnMGnTquRpRlcKS0k1fOLsaDqpAferlCj+2NO81kFrxQdmC3haEhtTnSKfyf7LMMOinUgoaVhgeg=;
In-reply-to: <[email protected]>
References: <0D5F8C81FCD24061BCDE1F5E2C9785E7@AGB> <[email protected]> <C65A1A5468AC4129A022E8D3FC8FC5C2@AGB> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Graham
 
Doing your net trawling for you......... :0)
 
May be a starter for ten? 
 
73 es GL Pete M0FMT IO91UX
From: M0FMT <[email protected]>
To: "[email protected]" <[email protected]>
Sent: Thursday, 11 April 2013, 10:47
Subject: Re: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz

OK Graham
 
Thought it was home brew retro.......... I am in that mode and think everbody else is! What do you do at the moment inject a Sig Genny?
 
Have you checked the net or checked out Vincent - QuartzLab etc?
 
Anyway what's that master osc circuit. I build from old RADCOM (pre 1975 when they published real amateur radio) and PW,QST etal. I use modern xtals with no known issues. Well trying to get third overtone for 10m not to chirp is an issue with me at the moment. 
 
OK yes got a stick on its way didn't want to tear up my existing upconverter design. But not sure there is much wrong with the UC approach it works for me. But want to try the direct approach. Do you get much Cross mod and IM products?

73 es GL Pete M0FMT IO91UX
From: Graham <[email protected]>
To: [email protected]
Sent: Thursday, 11 April 2013, 0:47
Subject: Re: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz

Ok Pete
 
Q where to  have  them  made  ?
 
The  set  , Marconi  Ocean span 1950's  valve  tx   needs  the  big  rock's  as the  oscillator  pass's   quite a  lot  of  power  via them ...hc6u  are  no  good  , drive level is very low - the ones fitted  are the wired- gold  flashed  ones  , so  cannot  etch  into the  band ...
 
the  gang  want  to  keep  it  standard
 
73 -G.
 
Ps  waiting  for  qty-3  £6   dongles : )

From: M0FMT
Sent: Wednesday, April 10, 2013 11:43 PM
Subject: Re: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz

Hi
 
If you want to spend a small fortune get them cut. However build a Mixer VXO from El cheapo standard xtals and or old PMR rocks. Then at your next rally buy a couple of Screw together 10xj or FT243 rocks of any frequency and put the El-cheapo xtals inside. And Hey Presto you have Retro rocks.
I have a small all valve 472 tx that uses 6.00 -6.472=0.472 vxo-able a couple of kc/s 12ax7-6am6-6cl6= 4wattso/p. Local QRP rig.
Hope this helps
 
73 es GL Pete M0FMT IO91UX
From: Graham <[email protected]>
To: [email protected]
Sent: Wednesday, 10 April 2013, 20:30
Subject: LF: Wanted 10XJ or FT243 XTALS Range 236.25 236.75 KHz

Wanted  10XJ  or  FT243  XTALS   Range   236.25    236.75  KHz   
 
Q  Is there  any  manufacture  of   crystals  in this  range  ?
 
Or  Surplus    items   available 
 
QTY 1  or  2  off 
 
TNX- Graham
 
G0NBD






<Prev in Thread] Current Thread [Next in Thread>