Re: LF: WSPR-15 on 630m

["Graham" <g8fzk@g8fzk.fsnet.co.uk>]

An interesting  thing

 

With  so many  wspr   stations  running ,  why in the  last week  are there  only  2  stations  showing as  decoded in  the  USA , and non other than  we2xgr  (who has a valid reason)  , Im sure  in the  past , there  was a much  higher   number  of  TA decodes  with  less  stations

 

Q Is it  true , there  is a  carrier-in-pass  band  de-sensing problem with the  wspr  decode  ?

 

The  large  ground wave  radius on MF has caused  problems  with  other modes  in the  past

 

G..

 

 

2013-02-23 00:42	PA3FNY	0.475642	-27	0	JO22nc	0.5	WD2XSH/17	FN42pb	5581	290
2013-02-23 02:40	PA3FNY	0.475642	-27	0	JO22nc	0.5	WD2XSH/17	FN42pb	5581	290
2013-02-23 00:20	PA3ABK	0.475785	-26	0	JO21it	0.5	WD2XSH/17	FN42pb	5565	290
2013-02-23 00:28	PA3ABK	0.475740	-26	0	JO21it	0.5	WD2XSH/17	FN42pb	5565	290
2013-02-23 00:52	PA3ABK	0.475740	-21	0	JO21it	0.5	WD2XSH/17	FN42pb	5565	290

 

 

From: wolf_dl4yhf

Sent: Friday, March 01, 2013 1:11 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: WSPR-15 on 630m

Hi Roland and all,

But a "dial frequency" of 472 kHz would place the beacon-like Opera transmission annoyingly close to the center of CW activity (472 to 474). Well I'm not really active on MF right now but this will hopefully change soon.

73,
  Wolf DL4YHF .

Am 01.03.2013 11:00, schrieb Roland Bruestle:

Hello Roman,
this is a good idea.
The question is, shall we Change the WSPR frequencies to Opera frequencies or opposite.
The frequency for  WSPR with 474.2kHz is already used in Europe and US.
WSPR15 should be together with WSPR2 for the reason someone wonts to test the difference between WSPR15 to WSPR2.
So I would wish that the Opera frequency would be shifted  to the dial frequency of 472kHz.

73
Roland DL3NDR


Am 28.02.2013 22:22, schrieb Roman RW3ADB:

Hi Roland, LF!

I was out of MF 16 feb, excuse.

May be trying MF tomorrow night?

What do you say about idea use a one dial freq for wsrp-15 and Op8?

This is double own chance to RX here.

Roman RW3ADB.

Sat Feb 16 2013 00:46:31 GMT+0400 (Local Standard Time) пользователь Roland Bruestle (r@mbsks.franken.de) написал:

Hi Roman,
yes I made a pause yesterday.
I am active now with WSPR-15 on dial 474.2kHz, TX 475.817  kHz (1.67kHz).

Good luck

Gruß
Roland DL3NDR

Am 14.02.2013 05:27, schrieb Roman RW3ADB:

Hi Roland, LF!

I monitor WSPR-15 yesterday, but nothing.

Hope to any activity tomorrow.

For info:

http://rw3adb.narod.ru/2013/20130213_475khz_QRM/20130213_WSPR15_475khz.01.JPG

Local QRM on 475 khz here.

The problem with automatical upload spots is not resolve.

May be who is know whats ports used by new WSPR prog for upload?

I can try to open it on the router.

The other question to all.

The freq's for OPERA and other digi modes vy nearby on the some HF bands. This is to get a choice to monitor two mode at once.

Will be good to cooperate OPERA and WSPR-15 into nearby pass bands w/o the local QRM on 630m.

Roman RW3ADB.

Mon Feb 11 2013 23:33:10 GMT+0400 (Local Standard Time) пользователь Roland Bruestle (r@mbsks.franken.de) написал:

Hallo, MW-friends,
I am still transmitting WSPR-15 on dial 474.2kHz, TX 475.817  kHz (1.67kHz).
I hope that I have solved the with my signal. The reason was the USB-Soundkard.
Good luck.

73
Roland DL3NDR