Better
TEST TO TEST RTTY BEACON DE DK7FC DK-FC DK7FC
LOCATOR: JN49IK JN49IK JN49IK
QTH: HEIDELBERG HEIDELBERG HEIDELBERG
OPWC STEFAN STEFAN STEFAN
TX: HOMEMADE CLASS-D PA RUNNING ABOUT 50W FROM A 12V SUPPLYO
ANT: INV-L 30M UP AND 70M LONG
URTHEG INNNSB AT
HTTP://WWW.QRZ.COMBXB9K7FC
HTTP://WWW.QRZ.COM/DB/1$(7FC
REPONTS WELNOME VIA RSGBXNWFNROO
(;-5 BLACKSHEEV.ORG).
7: BUE7 GPSVZLIGYDJQKDJMHUH MFWPELZTJZOXENUTAYMLG
TETEWPXSRRTYKBNPQIJTKVTKN
SXNMFKICLJYBBDMHXVVPMZZOGVCGJCEMJOSUBLCTHKYPC--77ZVWP
SHWPFWMXFBMSXGFADNJ PC B WXKGGMLESWAWGMKRAOVE
TEST TEST TEST RTTY BEACON DE DK7FC DK7FC DK7FC
LOCATOR: JN49IK JN49IK JN49IK
QTH: HEIDELBERG HEIDELBERG HEIDELBERG
OP: STEFAN STEFAN STEFAN
TX: HOMEMADE CLASS-D PA RUNNING ABOUT 50W FROM A 12V SUPPLY
ANT: INV-L 30M UP AND 70M LONG
FURTHER INFORMATIONS AT
HTTP://WWW.QRZ.COM/DB/DK7FC
HTTP://WWW.QRZ.COM/DB/DK7FC
REPORTS WELCOME VIA RSGB LF REFLECTOR (AT BLACKSHEEP.ORG).
73 73 73 73
--------------------------------------------------
From: "Stefan Schäfer" <[email protected]>
Sent: Wednesday, March 06, 2013 7:57 PM
To: <[email protected]>
Subject: Re: LF: RTTY 478.xxx
Eddie,
I'm back on RTTY now. The NAVTEX mode in fldigi cannot be set to 85 Hz
shift frequency. So i tried with 170 Hz. However there were no decodes. I
have to make some local tests.
Have to go now, will be back later, hopefully.
73, Stefan
PS: In Multipsk, NAVTEX can be set to 85 Hz shift. Will try all that
later.
Am 06.03.2013 20:20, schrieb Stefan Schäfer:
Hello Eddie,
Yes, very interesting. Jan/PA3ABK told me that AMTOR-FEC is the same as
NAVTEX. A quick google search and wikipedia check confirmed that :-)
NAVTEX is available in FLDIGI as well, which is fine :-)
I also installed Multipsk now and managed to decode my RTTY (from Twente)
even with that program.
Now i would like to try NAVTEX. Will change to that mode now...
73, Stefan
Am 06.03.2013 19:45, schrieb g3zjo:
Hi LF
I am continuing to test RTTY below 478.200 reports very welcome.
PA3ABK came up very nicely in QSO with DK7FC.
73 Eddie G3ZJO
|
