---

Date: Fri, 22 Feb 2013 16:42:59 +0100
From: [email protected]
To: [email protected]
Subject: Re: LF: VLF_signal

Hi Peter,

Nice. Sounds like progress :-)
When you're on 8970.0000000000000000 Hz, you will be visible on my 47 uHz grabber. I hope the line will be stable :-)
The SNR may be reduced a bit since i'm TXing on MF for the next couple of hours.
Good luck again.
PS: When using SpecLab, you can now use DFCW-45000 to write your complete callsign on the grabber here. Time is not the problem i think :-)

73, Stefan

Am 22.02.2013 16:28, schrieb [email protected]:

Hi Lubos, Peter an Stefan,

yes, yes, I confess.

thanks for congrats, Lubos.

I`m testing a new QRG generator as playing around with the vy nice SpecLab program with its possibility to control the sample rate by GPS.

Some days ago I used a stand alone GPS controlled exciter on 8970,0225Hz , now it should be 8970,000Hz (where have the five mHz gone?). GL
Uwe/dj8wx

---

Von: [email protected]
Gesendet: 22.02.2013 16:13
An: [email protected]
Betreff: Re: LF: VLF_signal

---

Ah, interesting! I can see that trace here as well, http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_VLF_Grabber.html. First i thought it is local but if you see the sam then someone must do a test :-)
Who is it? :-)
It is very strong at Paul Nicholson, http://abelian.org/vlf/fbins.shtml#p=1361538000&b=090&s=sp. Seems to come from E-W. So it could be DJ8WX again?

73, Stefan/DK7FC

Am 22.02.2013 06:27, schrieb Lubos OK2BVG:

Hello VLF!

There is a strong signal on 8969,995Hz visible on my grabber. It is really good signal, it is visible in both, DFCW6000 and DFCW600 windows.  

Whose is it? 

Congratulation, TX and antenna are good doing :-)

Lubos, OK2BVG