Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: LF: QRSS3 LF beacon test: frequency correction 137.766kHz

from [g3zjo] [Permanent Link][Original]
To: [email protected]
Subject: Re: LF: QRSS3 LF beacon test: frequency correction 137.766kHz
From: g3zjo <[email protected]>
Date: Wed, 23 Jan 2013 17:03:34 +0000
In-reply-to: <[email protected]>
References: <CAHAQVWM3OoYY5ieyJvSSfyunt13oLvfx5pYC8BfsHdt2DF4zDg@mail.gmail.com> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows NT 5.1; rv:11.0) Gecko/20120327 Thunderbird/11.0.1
Sorry for got to mention the frequency read out, just replace  475.XXX with 137.XXX, lazy here.

Eddie

On 23/01/2013 16:51, g3zjo wrote:
Hi Roger

I monitored for several hours, nothing seen here.

Negative reports are just as good as positive ones though so here is a capture, the Panosonic Plasma TV's came on at the end of this capture, kids home from school, so I have abandoned it now.

Eddie

On 23/01/2013 11:53, Roger Lapthorn wrote:
Using DCF39 on 138.830kHz as a frequency reference, I have checked the frequency of my QRSS3 QRP beacon and it is running higher up the band than I thought due to the way the crystal is loaded.

Frequency to look is 137.766kHz   +/-

Reports and screenshots (looking now in the right place) would be very much appreciated. I shall leave the beacon running all today at QRSS3 speed.

The beacon runs 8W into 20m spaced earth electrodes.73s
Roger G3XBM


[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: Re: Op32 correlation detection: RN3AGC, UA4WPF, UW8SM, Markus Vester
Next by Date:  LF: CQ QRSS now on 478.900, traumwandler
Previous by Thread:  Re: LF: QRSS3 LF beacon test: frequency correction 137.766kHz, g3zjo
Next by Thread:  Re: LF: QRSS3 LF beacon test: frequency correction 137.766kHz, Roger Lapthorn
Indexes:  [Date] [Thread] [Top] [All Lists]