Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Back to basics RTTY 45.45 / 85 Hz shift

To: <[email protected]>
Subject: Re: LF: Back to basics RTTY 45.45 / 85 Hz shift
From: "mal hamilton" <[email protected]>
Date: Wed, 19 Dec 2012 18:52:36 -0000
References: <74990487DB15443395032604923B066C@AGB> <EA3C26BB61EC47C893CE2E0AC1399EC3@AGB> <003301cdde11$1c631c00$55295400$@com> <EF2B819416A84A50BFF61A4990854581@AGB> <004901cdde13$433b5840$c9b208c0$@com> <B6D0C98ADEAC488E99D0160535814F5F@AGB>
Reply-to: [email protected]
Sender: [email protected]
Yes solid copy and NO drop outs also PA3ABK on freq
 
de mal/g3kev
 
----- Original Message -----
From: Graham
Sent: Wednesday, December 19, 2012 6:34 PM
Subject: Re: LF: Back to basics RTTY 45.45 / 85 Hz shift

That's not  bad , only  a  few  dropped   chrs
 
wonder if  Mal  is  seeing  anything  ?
 
G..

Sent: Wednesday, December 19, 2012 6:04 PM
Subject: RE: LF: Back to basics RTTY 45.45 / 85 Hz shift

Getting better. It would be an easy CW QSO........!

RYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYR

64646464646 SMART BEACONS SEND OPERA 1234567890

RYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYRYC

THE QUICK BROWN FOX  JUMPED OVER THE LAZEY MOON

DE  G0NBD  G0NBD G0NBD  TESTINV  IO83LK  IO83LK

 

From: [email protected] [mailto:[email protected]] On Behalf Of Graham
Sent: 19 December 2012 17:57
To: [email protected]
Subject: Re: LF: Back to basics RTTY 45.45 / 85 Hz shift

 

Thanks  Terry

 

Had to  check   qrz  for  the  range  , about   60  miles  !    100  watts  Ae  feed 

 

looks  about 30% ?

 

Tnx -G..

 

From: Terry GW0EZY

Sent: Wednesday, December 19, 2012 5:48 PM

Subject: RE: LF: Back to basics RTTY 45.45 / 85 Hz shift

 

Copy so far

 

ENS SEND OPERA 1234567890

RYRYRRRR QUICOWN FOXJUMP OVER THE LAZEYON

DE  G0NBD  G0NBD G0NBD  TESTINRW IIELK  IO83LK

 

73 Terry

 

From: [email protected] [mailto:[email protected]] On Behalf Of Graham
Sent: 19 December 2012 17:13
To: [email protected]
Subject: Re: LF: Back to basics RTTY 45.45 / 85 Hz shift

 

FLDIGI is probably the best

http://www.w1hkj.com/download.html

just run the install and then the set up wizard for call / name / sound
card

Once in and running , go to mode , select rtty , custom
click carrier shift 85 Hz baud rate 45.45 , click save + close

set rx to 501.000 usb and click 1Khz on waterfall

 

From: Graham

Sent: Wednesday, December 19, 2012 4:37 PM

Subject: LF: Back to basics RTTY 45.45 / 85 Hz shift

 

Long text beacon  +  qso  possible

 

Back to basics  RTTY  45.45 / 85  Hz  shift

 

Dial  set   501.000 usb

 

Tone  set  1 Khz 

 

Beacon + Rx   501 usb 

 

Reports  / calls   welcome

 

73 -Graham

G0NBD

<Prev in Thread] Current Thread [Next in Thread>