Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: Changing JT9 submodes

from [Joe Taylor] [Permanent Link][Original]
To: [email protected]
Subject: LF: Changing JT9 submodes
From: Joe Taylor <[email protected]>
Date: Sun, 28 Oct 2012 11:35:02 -0400
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows NT 6.1; rv:6.0) Gecko/20110812 Thunderbird/6.0 

Hi all,
You may not have seen my posted warning that this first release of WSJT-X may not properly re-initialize certain parameters when you switch between JT9 submodes.
Therefore: with this release, to change modes (e.g., from JT9-1 to JT9-2) you should 

1. Change to the new mode, using the Mode menu.

2. Exit the program.

3. Restart the program and operate.
This flaw will surely be fixed in the next release! Sorry for the possible confusion. 

        -- 73, Joe, K1JT
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • LF: Changing JT9 submodes, Joe Taylor <=
Previous by Date:  Re: LF: no decodes, help needed, Markus Vester
Next by Date:  RE: LF: no decodes, help needed, Terry GW0EZY
Previous by Thread:  LF: no decodes, help needed, Stefan Schäfer
Next by Thread:  LF: G3XIZ in JT9-2 on 500kHz, Rik Strobbe
Indexes:  [Date] [Thread] [Top] [All Lists]