Final decode , signal
faded after this ..... qrt 73 -G.
RX2: 23:58 @ 0.8 Hz: CQ de DL3NDR in JN59no <CRC-OK> -24 dB 662 miles @ 108 0.477 Mhz
Sent: Thursday, September 20, 2012 12:00 AM
Subject: Re: Re : LF: MF tonite with ROS
Graham,
I am sure your are right. We have to work
out a frequency scedule. May be 476.8 for WSPR in the future.
I sought it
should 476.8kHz for today not 477.8. Sorry please 476.8kHz.
So this is my
final change for this night. I go to bed. I let it run till
tomorrow.
73
Roland
Am 20.09.2012 00:27, schrieb
Graham:
Ok Have changed , but Opera
and Ros where first to pick 477 , so may
be its the other way round ? supposed to
check before TX
have set 477.8
G.
Sent: Wednesday, September 19, 2012 11:02 PM
Subject: Re: Re : LF: MF tonite with ROS
Graham, Gerhard
we have a problem with
WSPR.
I change frequency to 477.8KHz
Roland
Am 19.09.2012
22:53, schrieb Graham:
Roland
Ros mf-2 has best s/n
for dx beacon , I am monitoring 477 usb
now mf2/7
73 -G.
Sent: Wednesday, September 19, 2012 9:34 PM
Subject: Re: Re : LF: MF tonite with ROS
Nicolas, sorry, I am transmitting in
ROS-7. Good luck Roland DL3NDR Am 19.09.2012 19:11,
schrieb [email protected]:
Yes Roland but in ROS-2
or ROS-7 (usual for MF) with dial on 477 kHz
Last night i saw on the
screen banner yours calls announced on ROS-4.
F4DTL Nicolas
-----E-mail
d'origine----- De : Roland Bruestle <[email protected]>A: rsgb_lf_group
<[email protected]>Envoyé
le : Me, 19 Sep 2012 17:45 Sujet : LF: MF tonite with ROS
Hallo
MF,
second try, test transmitting with ROS beacon mode on 477, from
now.
Good look.
Graham, thank o lot you for your
improving.
Today ore tomorow, I want try a QSO with Gerhard.
73
Roland DL3NDR
|
|
