Hi Stefan, Group

Thank-you for the fine QSO.  Sorry but the rectifier in the 20A 60V power
supply unfortunately became a member of my late semiconductor club  just as
the final K was being sent.  Your sigs were quite audible on your last
over -- fantastic considering the rudimentary RX set-up here!

For TX, the usual Marconi XH100 was used to excite the Decca amp
which fed 5 amps RF to a 100m wire at ~15 m average height.

The attached ARGO screens show Stefan's QRSS4 sigs as received here.

73
Joe VO1NA

On Sun, 26 Aug 2012, Stefan Schäfer wrote:

Hi Joe,

Many thanks for the QSO, it was a pleasure!

I never saw such strong signals from you in 4405 km distance (http://no.nonsense.ee/qthmap/?qth=GN37OR&from=jn49ik). Excellent condx! Or have you added some dB on your side? The signal was solid and stable during the complete QSO, mostly arround 25 dB S/N, even better than in January this year. QRSS-3 would have been possible too. First i tried to answer you in slow hell (3s) but obviously i have been to weak for that.

Capture: https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC.jpg
https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC_2.jpg
https://dl.dropbox.com/u/19882028/LF/VO1NA_QSO_DK7FC_3.jpg

There must have been a problem or QSB at the end. Hope the setup still works.

I would be interested in captures as well, if you have some :-)

73, Stefan/DK7FC


Am 26.08.2012 01:38, schrieb Stefan Schäfer:

Joe,

You're leaving a big signal here in a QRSS-10 window! Like to try a QSO? :-)

73, Stefan/DK7FC

This electronic communication is governed by the terms and conditions at
http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php

dk7fc_na_r12_1.jpg
Description: JPEG image

dk7fc_na_r12_2.jpg
Description: JPEG image