Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: Re: LF: Beverage ant RX experiment

To: <[email protected]>
Subject: Re: Re: LF: Beverage ant RX experiment
From: "Graham" <[email protected]>
Date: Fri, 10 Aug 2012 12:36:24 +0100
Importance: Normal
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]

Roman,

Opera  Beacon  , has two  operating  modes  on 136 KHz  OP8   and OP32  ,

OP8  , tx time  =  8 minutes  , S/N  = APP   -34 dB  s/n
OP32  tx  time =  32 minutes  S/N =  APP  -39 dB   s/n

The system is free running and requires -NO- time locking . Tx may start at 'any' random time

OP uses On/OFF (CW) keying , Tx may be by using the windows base software , with either SDR , audio drive or com-port (ptt type) PIC or other micro based system

Rx is by the windows based software and may be via audio (conventional data mode's) or by SDR . due to the numeric data processing , a decode may be achieved with 'ANY' 50% (min) of the data , The decode process is based on ''Average'' signal levels , advantage can be made of rapid qsb during each individual Tx pulse by integration , impulse noise is filtered by non-linear routines , numeric filtering facilitates pulse shape recovery

NO pre-filtering is required , use of narrow filters , noise limiters etc will degrade decoder performance

When using conventional SSB tx/rx the frequency is defined as ' Rx Dial set USB' , ie 136.00k , 500.000k and 477.000k..etc..

This ensures the correct audio pass band is selected , when using the windows based software. each mode has a dedicated audio pass band , (defined on the waterfall display by two red lines , marking the upper and lower boundary frequency , carriers 'must be inside limits

If  using   'VFO'    tx  control, the  Rf  carrier  frequency  range :-

OP32  137.5 > 137.6  KHz

OP8    137.6 > 137.7  KHz

As the filter edges are quite steep it would be advisable to aim for a frequency mid-band to accommodate system tolerances ,

Decode reports are distributed via the web or stored locally , but to save the local results , the copy spots or highlight and copy/paste is needed

73 -Graham
G0NBD



--------------------------------------------------
From: "Roman RW3ADB" <[email protected]>
Sent: Friday, August 10, 2012 1:43 AM
To: "rsgb_lf_group" <[email protected]>
Subject: RE: Re: LF: Beverage ant RX experiment


Hello Stefan!
I'm trying to ask abt it RD4HU, but is not sure abt to get an answers. The team is so busy to field day prepare I think.
The acty at night saturday to sunday 100% will be needed.
RD4HU and RA4HGN vy skilled op's and informed abt all modes, freq's and OPERA.

73
Roman

Hello Roman,

Am 09.08.2012 00:05, schrieb Roman RW3ADB:
Hi LF.

RD4HU & Co planning to make an 136 kHz Beverage ant experiment in
LO52hs at next weekend 10-11-12 avg.
2 km beverage ant will be installing into steppe area direct to the EU.

OK, thanks for the information.

The action team requests to support the experiment by your
transmissions.

You can count on me. Just tell me what mode and frequency you prefer.

Some details you can find on the russian forum 136.su on russian
language:
http://136.su/forum/index.php?topic=128.msg4597#msg4597

--
Roman RW3ADB.

73, Stefan/DK7FC



<Prev in Thread] Current Thread [Next in Thread>