LF: QRSS Beacon Keyer

To:	[email protected]
Subject:	LF: QRSS Beacon Keyer
From:	Andy Talbot <[email protected]>
Date:	Tue, 17 Apr 2012 12:58:15 +0000
Dkim-signature:	v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=mime-version:date:message-id:subject:from:to:content-type; bh=hk+LP3Vw421Z29zA62u2155KWglwKCCeX73S0Bmo4Yg=; b=MvAItL+jcouQX0nmEgVBAFHHIybjSzSWKuJuAVzEjiN137h0c0XO9mEdg/N+4a9X2P yqq8315UAsUDS+NwxYEQEXRtEfSiGex08gFsj2KUlxiVY1xp2/MdS1HS24FpIshUKoSB DMDAdnm5dsqSLVOtxBUH0tO47BrknALmts6bE2JLaQPwg+q9YT+2F6lhBdOfO6pIQFHF 6ZQbuH8rzPn8IxrTFljNwIoH/2kr1XC091gK8OmjwHGiDbkaZ1qGaoAK2S1/IZcdSEHN nWPbDfNFlT0kWYgPE1/taky0TSpmOOQ/iMEJfdJv7wUCHuKlc8XljEWpNJ6VHQHg8Xmr 2OSw==
Reply-to:	[email protected]
Sender:	[email protected]

There was a discussion here a while ago about generating QRSS without
having to use a PC.   There is a version of my mini-beacon keyer
module for QRSS, with dot lengths selectable of 1,2,3,5,10,20,30 or
100 seconds.   The keyer is programmable over a 1200 baud RS232
interface using ASCii text commands, and teh message is stored in
non-volatile memory.   Speed and programmable pauses can vary during
the message

See  http://www.g4jnt.com/BcnKeyer.htm   for full details, and
firmware download for DIY construction.
Fully built and tested modules from
http://www.g4jnt.com/The_JNT_Shop.htm#BcnKeyer  (select the QRSS
option)

I'll have stocks of the standard ones at the Martlesham Microwave
Roundtable on 28/29 this month

Andy
G4JNT

<Prev in Thread]	Current Thread	[Next in Thread>
LF: QRSS Beacon Keyer, Andy Talbot <=

Previous by Date:	Re: LF: Beacon to the west, Stefan Schäfer
Next by Date:	LF: DCF39 break, Stefan Schäfer
Previous by Thread:	LF: My 136kHz grabber is running, Steinar Aanesland
Next by Thread:	LF: DCF39 break, Stefan Schäfer
Indexes:	[Date] [Thread] [Top] [All Lists]