Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: QRSS-60 to the west

To: <[email protected]>
Subject: Re: LF: QRSS-60 to the west
From: "henny van elst" <[email protected]>
Date: Fri, 20 Jan 2012 20:41:48 +0100
References: <[email protected]><CABP+t7Z3g3i9ZyawTJr-8nFoe=LOjaU0ZR8Hofe8iXRW47vH=w@mail.gmail.com><[email protected]><CABP+t7aDEE1qkqFKOaRLCZSG0hAMF1SBYh+QZre42topO12hCQ@mail.gmail.com> <CABP+t7YpxBCjKw4j6HSmVUMFvBFDZXLVH5-rvdRFL_f+htPk3g@mail.gmail.com>
Reply-to: [email protected]
Sender: [email protected]
Hello Doug,
it was not me,i started this afternoon,i blow up the power supply,so i can only make 25 watt on the moment,
henny pa3cpm
best 73's
 
----- Original Message -----
Sent: Friday, January 20, 2012 8:17 PM
Subject: Re: LF: QRSS-60 to the west

Actually, I may have a clue who it was after all.
 
"Hello LF,
cpm qrp is me,pa3cpm ,henny jo-22-md,
the power is only 25 wattt he freq.is 136.170.3Khz.
henny cpm
73's"
 
Henny, were you transmitting at 07:12 UTC?
 
 
 
Doug KB4OER
 
 


 
On Fri, Jan 20, 2012 at 2:06 PM, Douglas D. Williams <[email protected]> wrote:
Hi Stefan. You are most welcome. :-)
 
On my ARGO display, 700Hz is the CW sidetone "BFO", so whatever frequency I have the radio tuned to should be 700Hz on my ARGO display. Signals on frequencies higher than that should appear above 700Hz, and frequencies lower than that should appear below 700Hz.
 
Here is an example:
 
 
In this capture, I had the radio tuned to the USA Lowfer "watering hole" of 185.300kHz. You see station "WM" on approx 700Hz (his ID is a graphical ID that varies in frequency approx 0.5Hz), and his claimed transmit frequency is 185.2995kHz. Above him, at approx 701.6 on the ARGO screen, you see Lowfer beacon "WMS", who runs a straight QRSS60 signal on a claimed frequency of 185.3015 kHz.
 
So, having said that, whatever signal (whether it be a QRSS signal or some sort of QRM) that appears below you on last night's screen capture was on an approx frequency of 136.171kHz. I have no idea who (or what) it is, but it appears to be a QRSS signal to me.
 
 
 
73,
Doug KB4OER


 
2012/1/20 Stefan Schäfer <[email protected]>
Thank you Doug for the feedback!
Hmm, who could be the other one? I saw VE7SL on the VE2IQ grabber but he was higher in frequency... Or do you use a LSB receiver? :-)

73, Stefan7DK7FC


Am 20.01.2012 11:30, schrieb Douglas D. Williams:
Good copy here in TN, Stefan. Looks like you weren't alone after all, as I see another operator slightly below your signal.
 
Doug KB4OER
 
2012/1/19 Stefan Schäfer <[email protected]>
LF,

Again i'm running a lonely beacon tonite at 136.172 kHz (with a small offset of -0.1 Hz) in QRSS-60.
There was rain so a dB is lost but anyway some grabbers over the pond catch the first traces.
Propagation might be a bit better.

73 all and many thanks to all the grabber runners! That a really good service a definitively essential to keep transmitting station (the few) motivated to stay on air.

Stefan/DK7FC

PS: After further changes on EMC issues in the system i shall come back tomorrow using the IQ converter to generate my VFO signal...




<Prev in Thread] Current Thread [Next in Thread>