Re: LF: ROS MF-7 500 KHZ TEST

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

G...

Thanks for report, was running 1 watt ERP with Racal amp.

I am using the latest ROS v6.5.6, it looks OK this end, no char skip at beginning.

I have noticed that the beacon countdown does not work on v6.5.6, v6.5.5 & v6.5.3 (it just repeats the first 2 numbers continuously) but is OK on v6.4.7. So had to send manually with latest version.

OK mail to Finbar.

G...

On 5 July 2011 21:46, Graham <g8fzk@g8fzk.fsnet.co.uk> wrote:

Good  signal  from you  , with the new   Sb card this  end  ,

 

Q what   version  of  ROS  are  you  running  -  is it   6-5-6 ?

 

There  is a  change  of  synchro  , which  if you  have the older  version may  result  in the  loss  of the  first  CHR  , note  I decode    Q test ?

 

G..

 

RX7:

20:10 @ 6.7 Hz: Q test de G4WGT in IO83QO K <STOP> -8 dB 21 miles @ 056 0.500 Mhz

RX7:

20:12 @ 6.7 Hz: Q test de G4WGT in IO83QO K <STOP> -8 dB 21 miles @ 056 0.500 Mhz

RX7:

20:15 @ 6.7 Hz: CQ test de G4WGT in IO83QO K <STOP> -8 dB 21 miles @ 056 0.500 Mhz

RX7:

20:18 @ 6.7 Hz: CQ test de G4WGT in IO83QO K <STOP> -7 dB 21 miles @ 056 0.500 Mhz

RX7:

20:24 @ 10.0 Hz: CQ test de G4WGT in IO83QO K <STOP> -8 dB 21 miles @ 056 0.500 Mhz

RX7:

20:30 @ 10.0 Hz: CQ test de G4WGT in IO83QO K <STOP> -8 dB 21 miles @ 056 0.500 Mhz