Re: LF: Come back of VO1NA

[jcraig@mun.ca]

Merci Beaucoup, Jean-Pierre,

Your grabber was very useful for checking that the TX/ATU was working
and that the OCXO was on frequency. There are no longer LORAN lines
for calibration.  Thank-you for operating your grabber.

Will try again tonight, weather permitting.
100 watts 1.6 amps to a 100m wire at 15m average height.
QRSS30 137.777 kHz.

The RX loop has been ravaged by the WX, but will try watching
on 136.172 QRSS30 with a  less than optimal RX aerial if this
is the correct frequency to watch for EU.

On Mon, 28 Feb 2011, "Jean-Pierre Méré (F1AFJ)" wrote:

> Hi all !
>
> Velcome Joe !  good copy of your beacon last night on 137 777.0
>
> 73 qro Jean-Pierre f1afj