|
Ok Gary
Just back ..
The word from Mr Ros is ,
best not to run parallel sessions of ROS , due to
cup load distribution , I think it was -ok- in the early
versions but since the addition of the anti-jam
and code enhancements , its running at the edge
..and 'micro time' cpu overloads are occurring
that do not show on the meter , however these
degrade the performance ..
Best would be to call for
MF-1 or 7 on the HF frequency , that way the
other station only needs to run -one- session - mf-7 is
a good 10 to 12 dB better than psk31 over
the same path , so should give good decodes
!
73 -G ..
Sent: Sunday, January 09, 2011 8:06 PM
Subject: Re: LF: ROS 502kHz & X Band
Graham,
Saw signal strong but no decode, I am set in 80M mode, ROS 4 best.
Gary.
On 9 January 2011 19:48, Graham <[email protected]>
wrote:
called 3602 mf-7
and mf-1 looks no decode
that freq now has wide data
as well
go to go out .. see
iceland is decoding
best ask for mf-7 repyl on 80
mtrs mf-7
is on on hf , 100hz wide
good luck !
G.
Sent: Sunday, January 09, 2011 7:16 PM
Subject: LF: ROS 502kHz & X Band
LF,
G4WGT 502kHz or 3602kHz X band.
3 minute beacon, please call.
-- 73,
Gary - G4WGT - IO83qo.
-- 73,
Gary - G4WGT - IO83qo.
|
