Re: LF: AW: Ros MF-1 502 K

To:	<[email protected]>
Subject:	Re: LF: AW: Ros MF-1 502 K
From:	"Graham" <[email protected]>
Date:	Sat, 28 Aug 2010 00:49:23 +0100
Importance:	Normal
In-reply-to:	<1A29E0EE0B28401AB755F4306EE202CE@2a2d7ed321c6425>
References:	<AF7B22C9D4B94D4B94031CD43B0A6D45@AGB> <1A29E0EE0B28401AB755F4306EE202CE@2a2d7ed321c6425>
Reply-to:	[email protected]
Sender:	[email protected]

Thanks Gerhard

well thats not far off 100% cq de g0nbd in io83lk .... but you did decode the end frame as you have <stop> -36

-36 is 1 db under the limit !

G..

From: Beckmann, Gerhard

Sent: Saturday, August 28, 2010 12:12 AM

To: [email protected]

Subject: LF: AW: Ros MF-1 502 K

Hello Graham,

?.much QRM and low signal, but ?somewhat? decoded?.

RX1: 23:04 @ 2,9 Hz: CQ DE G0NB9P<Q@0O83LK <STOP> -36 dB

73?s de Gerhard // DK6NI (JN59LN)

Von: owner-[email protected] [mailto:owner-[email protected]] Im Auftrag von Graham
Gesendet: Samstag, 28. August 2010 00:09
An: [email protected]
Betreff: LF: Ros MF-1 502 K

Running ROS -MF-1 beacon

tx/rx 502 K usb

rx - 502 K

beacon in auto reply

till round 2300 gmt , testing

<Prev in Thread]	Current Thread	[Next in Thread>
LF: Ros MF-1 502 K, Graham LF: AW: Ros MF-1 502 K, Beckmann, Gerhard Re: LF: AW: Ros MF-1 502 K, Graham <= Re: LF: Ros MF-1 502 K, F4DTL Re: LF: Ros MF-1 502 K, Graham

Previous by Date:	LF: AW: Ros MF-1 502 K, Beckmann, Gerhard
Next by Date:	LF: G0NBD Ros MF-1 502 K, F4DTL
Previous by Thread:	LF: AW: Ros MF-1 502 K, Beckmann, Gerhard
Next by Thread:	Re: LF: Ros MF-1 502 K, F4DTL
Indexes:	[Date] [Thread] [Top] [All Lists]