Re: LF: 8.970khz

To:	[email protected]
Subject:	Re: LF: 8.970khz
From:	Stefan Schäfer <[email protected]>
Date:	Wed, 02 Jun 2010 14:30:04 +0200
In-reply-to:	<36961E69CE53474DA934F2C823FD62FC@ns94d01ae4d850>
References:	<36961E69CE53474DA934F2C823FD62FC@ns94d01ae4d850>
Reply-to:	[email protected]
Sender:	[email protected]
User-agent:	Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3

Wow, nice, congrats!

What was the mode in which you have transmitted? QRSS120?

You could try such a TV transformer. That may give you easily 30dB more power (depending on your losses), so you could reach 1,5km!?
If you cannot find such one, you could try a ferrite core out of an SMPS. But it will be a lot of work to wind that secondary coil and handle the HV!

Good luck!

73, Stefan

Am 02.06.2010 14:01, schrieb henny van elst:

Hi LF,

I also did some tx test on 8.970khz,using a power oscillator.

output on 8.9khz 40 volt.

than i take a transformer from the junkbox

40 volt input gave me 160 volt output.

I use my 137khz antenne (340PF).and i can hear my signal 0.5km away,

the reciever is the debeg portable with a datong up converter(28mhz) and a home made loop ,dameter 50cm.

will be continu,

Henny pa3cpm

best 73s

<Prev in Thread]	Current Thread	[Next in Thread>
LF: 8.970khz, henny van elst Re: LF: 8.970khz, Stefan Schäfer <= Re: LF: 8.970khz, henny van elst LF: 8.970Khz, henny van elst

Previous by Date:	LF: 8.970khz, henny van elst
Next by Date:	LF: 8.970Khz, henny van elst
Previous by Thread:	LF: 8.970khz, henny van elst
Next by Thread:	Re: LF: 8.970khz, henny van elst
Indexes:	[Date] [Thread] [Top] [All Lists]