Re: LF: RE: 503.600 kHz JT4A

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

Jim,

Thanks for your report, I can see a trace on Dave's grabber at Birmingham & a very faint trace on my JT4A waterfall, it seems to be improving in strength but not enough for a decode yet.

One consolation is that it would not be visible or audible for CW.

Keep trying.

73,  Gary - G4wgt.

On 7 February 2010 20:00, James Cowburn <james.cowburn@virgin.net> wrote:

Hi Gary

 

3 captures of your signal so far all about -17dB.  I am Txing now on “odds” lets see if I make it.

 

I’ve had comm port issues before too, DM780 is a b****r for not letting go

 

 

With best regards

 

 

Jim

 

 

---

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Gary - G4WGT
Sent: 07 February 2010 19:50
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: RE: 503.600 kHz JT4A

 

OK Jim,

 

Up & running now, just had a comms port snag, another app was holding the port.

 

GUD LUK, Gary - G4WGT.

On 7 February 2010 19:37, James Cowburn <james.cowburn@virgin.net> wrote:

Hi Gary

 

I am listening out for you and Txing on odd minutes a reply

 

 

With best regards

 

 

Jim

 

 

Dr. James Cowburn

 

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Gary - G4WGT
Sent: 07 February 2010 19:17
To: LF Group (RSGB)
Subject: LF: 503.600 kHz JT4A

 

Hi LF,

 

I Will be running JT4A in "QSO" mode tonight, replies/calls & reports will be very welcome.

 

Dial frequency 502.300 kHz,  signal frequency 503.600 kHz, JT4A operating Tx First (even minutes).

 

Tx RF power 50 watts & ERP 200 mW.

 

73,  Gary - G4WGT.