Re: LF: Re: 500 kHz WSJT JT4A

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

Hi Roger,

Set your dial frequency to 502.300 kHz for centre frequency 503.600 kHz. I have tweeked my dial frequency to 502.320 kHz so I Tx on 503.600 kHz, there must be a small error in my system.

Several decodes coming in now.

Let me know if you are successful.

Gary - G4WGT.

2010/1/19 Roger Lapthorn <rogerlapthorn@gmail.com>

What dial frequency/mode do I set Gary please?

73s
Roger g3XBM

2010/1/19 Gary - G4WGT <g4wgt@tiscali.co.uk>

Hi Martin,

Thanks for the report seen on the Twente Rx.

I did look & was surprised to see my QRP signal showing up. You should be able confirm as the Tx is only for 1 minute on the even minutes. Now hoping for others to try decoding.

I may attempt QSO's at some point if I see that there are others decoding. I haven't tried the mode before, just monitored on HF.

73,

Gary - G4WGT.

2010/1/19 Martin Evans <books@mollies.freeserve.co.uk>

You've got a good signal on the Twente receiver, Gary.

At least - I assume that it's you, it's the correct frequency.

Can't decode it, of course.

Martin  GW3UCJ.

--

http://g3xbm-qrp.blogspot.com/
http://www.g3xbm.co.uk
http://www.youtube.com/user/G3XBM
G3XBM    GQRP 1678      ISWL G11088