|
LF,
Sorry,my last email (see also below) was not
intended to be sent to the list, but to
DF6MK.
I would not post in German language on an
anglophone reflector although
I've noticed great tolerance on this list in this
respect.
Anyway,I've also noted the <...> decodes a few times
while
spotting WD2XSH/17 and was a bit surprised,too,
but then correct decodes took place.
It seems that WSPR2.0 still cannot write callsigns like WD2XSH/17 into
the
blue window in the upper right corner of the WSPR window.
73
Clemens
DL4RAJ
----- Original Message -----
Sent: Sunday, December 27, 2009 10:01
AM
Subject: Re: LF: "WA" beacon & WSPR
2.0
Hallo Werner,
genau die zitierte Passage aus dem untenstehen
Txt traf bei mir
ein paar Mal auch zu.
>It takes two, 2 minute transmissions to send
>the full
call, grid, and power. You may see decodes that look
like
> <...> followed by the grid and/or power. WSPR
has not decoded the call
>yet but only the second part of the complete
message. With a marginal
>signal and fades, this may be all you will
get. I don't know how long it
>stores the second half (or the
first half) of the message to splice it
73
Clemens
DL4RAJ
----- Original Message -----
Sent: Saturday, December 26, 2009 8:41
PM
Subject: Re: LF: "WA" beacon & WSPR
2.0
Hello, Graham, Rik, and
All,
Joe K1JT was kind enough to
modify the WSPR program to accommodate
our long calls with the /.
It takes two, 2 minute transmissions to send
the full call, grid, and
power. You may see decodes that look like
<...>
followed by the grid and/or power. WSPR has not decoded the
call
yet but only the second part of the complete message. With a
marginal
signal and fades, this may be all you will get. I don't
know how long it
stores the second half (or the first half) of the
message to splice it
together. Joe also added the CW ID
feature to version 2.0 which is
required by our experimental
license. He has been very supportive of our
600 meter
efforts.
The set up here is 100 watts to
a wire, 35 ft inverted L with two
top loading wires each about 100
ft long. I am really surprised (and
pleased) to get across
with this setup. I am inland from the coast and
the path to Eu is
over land till the path goes over salt water off the
coast of New
Brunswick, Canada. Want to raise the antenna a bit more
and
increase the top loading but that may not happen till spring
now.
73 and Happy New Year.
Bob WD2XSH/37 FN42fo
On Sat, 26 Dec 2009
18:34:15 +0100 Rik Strobbe
<[email protected]>
writes:
> Graham, Rick, Bob,
>
> I guess that when the CW
id of a WSPR station is audible there
> should
> be
solid copy in WSPR.
> But, as mentioned by Bob, WSPR 2.0 was used to
transmit the unusual
>
> WD2XSH/37 callsign. I noticed
that older version of WSPR do not copy
>
> this
properly, even when the signal is strong.
> I have been running WSPR2
and WSPR1.1 simultaniously for some days
>
> (the first
spotting as ON7YD the other as OR7T) and noticed that
>
WD2XSH/37 produced all kinds of odd messages with WSPR1.1. WSPR2
> decodes OK.
>
> 73, Rik ON7YD - OR7T
>
> Quoting Graham <[email protected]>:
>
> > Rick,
> >
> > Looks like wd2x
.. was the station .. you can check what
> stations are
> > operating at : http://wsprnet.org/drupal/wsprnet/spots
>
>
> > 2009-12-24 03:38 WD2XSH/37
0.503912 -26 0 FN42fo
2
> ON7YD
> > JO20ix
5615 52
> >
> > G..
> >
> >
--------------------------------------------------
> > From: "Rick
Wakatori" <[email protected]>
>
> Sent: Saturday, December 26, 2009 10:39 AM
> > To: <[email protected]>
>
> Subject: LF: "WA" beacon received at 503kHz.
> >
>
>>
> >> Using WSPR, I heard "WA" beacon in CW or QRSS at
around 503kHz.
> >> The signal was visible on the screen during
last night.
> >> Please let me know the callsign and the
QTH?
> >> Rick
> >> --
> >> -.. .
--... .-.. .---- .-. .-.. .-.. .-.-.
> >> 7L1RLL under
ubuntu/Linux in Kawasaki,Japan(JP)
> >>
URL="">> >> -..---
-.- .-.. ..-.. --. --. ...- .-... ...-.
> >>
>
>>
> >>
> >
> >
> >
>
>
>
>
>
>
>
____________________________________________________________
Weight
Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.juno.com/TGL2141/c?cp=yi9iW2lTPi_FlJuAPbZNdQAAJ1D5rfaR-77IPsUFbn2LcZ2XAAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=
Eingehende eMail ist virenfrei.
Von AVG uberpruft - www.avg.de
Version: 9.0.722 /
Virendatenbank: 270.14.120/2587 - Ausgabedatum: 12/26/09 09:27:00
Eingehende eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 9.0.722 / Virendatenbank: 270.14.120/2588 - Ausgabedatum:
12/26/09 20:02:00
|
