Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: WSPR 137.0k

To: <[email protected]>
Subject: LF: WSPR 137.0k
From: Lubos OK2BVG <[email protected]>
Date: Mon, 21 Sep 2009 15:03:53 +0200
Importance: Normal
In-reply-to: <899D03F0F8574A22A5F2C7EC94DE9353@JimPC>
References: <4C6A9564799D4F7FA98DC30F8744135C@radiorummet> <8DF678EC671345C0A98CFC21311955E8@JimPC> <[email protected]> <E26E8AA7E9C248769FCA392E21D4F7CF@JimPC> <01b801ca3a40$f826a2c0$0201a8c0@Clemens04> <4A395A802C5242128306AE2A1698AA02@JimPC>
Reply-to: [email protected]
Sender: [email protected]

Hello Jim, LF!
I have connected my LF aerial through divider 1/2, so I am able to use two LF receivers simultaneously now. The first is on 137.777 for QRSS60, the second would be for WSPR experiments on 137kHz.
I hope to decode your WSPR signal!

73!

Lubos, OK2BVG, JN88KS

**************************



> From: [email protected]
> To: [email protected]
> Date: Mon, 21 Sep 2009 08:07:57 +0100
> Subject: Re: LF: Re: WSPR 137.0k
>
> I forgot to say the beacon shut down at about 0700utc...
>
> ----- Original Message -----
> From: "James Moritz" <[email protected]>
> To: <[email protected]>
> Sent: Monday, September 21, 2009 8:04 AM
> Subject: Re: LF: Re: WSPR 137.0k
>
>
> > Dear LF Group,
> >
> > Thanks to all for the overnight reports/decodes. I also set my RX to
> > listen for WD2XES on 137.577k, but no decodes here - perhaps not suprising
> > considering the level of QRN!
> >
> > Cheers, Jim Moritz
> > 73 de M0BMU
> >
> >
> >
>
>


Buďte v kontaktu se svými přáteli z Facebooku a Hotmailu Klikni zde! =
<Prev in Thread] Current Thread [Next in Thread>