Hello Graham, LF!
OK, many thanks for an interesting information. I am going to receive on 503.700kHz this night.
73!
Lubos, OK2BVG
From: [email protected]
To: [email protected]
Date: Sat, 1 Aug 2009 00:28:11 +0100
Subject: Re: LF: Signals on 600m
Hi Lubos,
If you are seeing a signal on 503.7 , then
that may be the Beacon that Andy is running :-
Gary has been running the recording software for
some time now , the beacon signal plot can be seen :-
If it is possible for you to arrange for
the 503.7 khz signal to produce a 1500 Hz audio tone , then
you could try running the beacon recording software , it will
give you a direct plot of amplitude / time
73 - Graham ..
Sent: Friday, July 31, 2009 11:40 PM
Subject: LF: Signals on 600m
Hello LF!
I saw good cw signal on 502.135 (see the capture)
and 503.700 kHz. My monitor was in QRSS3 mode, so I can´t decode regular cw.
Lubos, OK2BVG
Buďte v kontaktu se svými přáteli z Facebooku a Hotmailu Klikni zde!
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database:
270.13.38/2274 - Release Date: 07/31/09 05:58:00
Buďte v kontaktu se svými přáteli z Facebooku a Hotmailu Klikni zde!
=
|
