|
Thanks Dave,
Yes , that looks like me ! , should have the JT2
showing as a single ~ slightly wobbly tone~ during the next 60 second
time window ?
Running JT2 JT65-A in sequence ,
tx dial frequency is 501.7 Khz , usb , software running at default
frequency , giving round 503 'rf' ae
frequency , dont need to be on frequency with these modes , just in the
passband and will print !
Tnx - Graham ..
----- Original Message -----
Sent: Saturday, March 15, 2008 9:56
PM
Subject: LF: [500]: Re: Beacon JT65-A and
by popular request JT2 501.7 Khz USB 1800=2400 Hrs 15 march
Graham,
Are
you transmitting JTxx on 503.0 kHz?. Signal visible/audible with QSB on that
frequency.
Chris G3XIZ's QRSS10 signal very strong on 503.95
also.
73,
Dave G3WCB IO91RM Nr Windsor, S E England
SORRY FOLK'S
DOSENT LOOK LIKE MULTIPSK WILL RUN ON OPPOSITE
TIME WINDOW
JT65-A NOW IN NORMAL
WINDOW
JT4 -TX FIRST SET= TX
IN REVERSE WINDOW
BEACON - ON AIR - 5 WATTS TILL 1800 ,
G ..
----- Original Message -----
Sent: Saturday, March 15, 2008 4:40
PM
Subject: LF: Beacon JT65-A and by
popular request JT2 501.7 Khz USB 1800=2400 Hrs 15 march
Beacon JT65-A and by popular request JT2 501.7 Khz
USB
1800=2400 Hrs 15 march
Hi ..All
Running sequential beacons ,
JT2 and JT65-A at dial frequency 501.7 Khz -
USB
The JT2 transmission is in its normal time
slot, the JT65-A , is selected -EVEN-
==== The mode
alternates on the minute ====Same
Frequency===
Running ,
JT2 Beacon
Tx Dial frequency 501.7
Khz (offset = 0)
mode USB
My Tx in
'EVEN MINS'
Running JT65-A
Dial frequency 501.7
Khz (offset = o)
Running multipsk
!!!!! TX PERIOD SET =
ODD=
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.21.7/1329 - Release Date:
3/14/2008 12:33
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.519 / Virus Database: 269.21.7/1329 - Release Date: 3/14/2008
12:33
|
