Dave, LF,
Thank you for the report Dave, looks like the mode is working quite well at
distance. A few are decoding it quite well now.
Next, a 2 way QSO !!
73
Gary - G4WGT - IO83qp
----- Original Message -----
From: "Dave G3WCB" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 18, 2007 3:43 PM
Subject: RE: LF: 500 KHz RTTY test
Hi, Gary.
Copying your 22/23Hz RTTYsigs here also. The G0MRF beaon is very strong at
this QTH, but you are 100% during the breaks in the G0MRF beacon.
I'm using WinWarbler (freeware), which works fine but is a bit "wide open"
and gets distracted by any other nearby transmissions.
"G4WGT IO83QP TESTING", "JUMPS OVER THE LAZY DOG G4WGT G4WGT RYRYRYJ"
etc,etc.
73, Dave G3WCB IO91RM
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Gary - G4WGT
Sent: 18 November 2007 15:09
To: [email protected]
Subject: Re: LF: 500 KHz RTTY test
Chris, LF,
Thank you for the report, keep watching.
73
Gary - G4WGT - IO83qp
----- Original Message -----
From: "Chris McCarthy" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 18, 2007 2:55 PM
Subject: Re: LF: 500 KHz RTTY test
Gary,
I have been hearing you for the last 45 minutes, but unable to resolve so
far. Your about S3.
Chris, G3XVL
On 18/11/2007, Gary - G4WGT <[email protected]> wrote:
Hi All,
Just begun testing on 503.600 KHz using RTTY, 22 bd, 23 Hz shift.
It is possible that this slower speed will decode better at the narrow
shift
over greater distances.
I will appreciate any reports.
The software I am using is MMTTY.
73
Gary - G4WGT - IO83qp
|
