Hi Giulio, I have a trace from 2330z to about 0245z at about 135.797, the
signal seems to be subject to quite a lot of fading, so there are periods
when the signal is not really copiable even at the 40w level. But I also
have traces of almost 15 minutes length where the signal is easily seen.
This should cover a complete power cycle. There do not seem to be gaps where
the low power level QRSS3 should be, so maybe even the low level was copied
on peaks of the fades. I really need to measure the timings more accurately
and work out how long each QRSS3 transmission would have been. This is
using ARGO in 10 sec mode and slow display.....it was done this way to have
a comparison of the stepped power levels all on screen at the same time.
Cheers de Alan G3NYK
[email protected]
|
